Usage:
start by:
a) remove fuel filter base
b) remove turbocharger
c) remove fuel injection lines
1. Remove bolts (2) and remove elbow (1) from the muffler.
2. Disconnect line (4) from the governor. Remove exhaust manifold guard (3).
3. Remove nuts (6) and the washer that hold the manifold to the cylinder head. Remove manifold (5) from the studs.
Install Exhaust Manifold
1. Make sure the exhaust manifold studs are tightened to a torque of 20 ± 3 lb.ft. (25 ± 4 N·m) in the cylinder head.
2. Make a replacement of the manifold gaskets if necessary.
3. Put 9M3710 Anti-Seize Compound on the threads of the studs and nuts for the manifold. Put manifold (1) in position on the cylinder head and tighten the nuts and washers to a torque of 32 ± 5 lb.ft. (43 ± 7 N·m).
4. Install the washers, spacers (with the longer spacer toward the front of the engine) and shield (2). Install the washers and nuts to hold shield (2).
5. Connect tube assembly (3) to the governor.
6. Put 9M3710 Anti-Seize Compound on the threads of the bolts for the elbow and install elbow (5) to the muffler.
end by:
a) install fuel injection lines
b) install turbocharger
c) install fuel filter base