Usage:
1. Remove two bolts (1) from rear of crankcase guard.
2. Put a floor jack in position under the crankcase guard. Remove the two bolts from each side of the crankcase guard.
3. Lift the crankcase guard until the two front brackets are free. Push the crankcase guard back and lower it.
Install Crankcase Guard (Rear)
1. Put the crankcase guard on the floor jack.
2. Lift the crankcase guard until the front brackets can be connected.
3. Install the two bolts that hold the rear of the crankcase guard in position.
4. Install the two bolts on each side of the crankcase guard.
5. Remove the floor jack.
Remove Floor Plate
1. Remove knob (1) from lever.
2. Remove retainer and seal (3).
3. Remove bolts and remove floor plate (2).
Install Floor Plate
1. Put floor plate (1) in position. Install the bolts that hold it.
2. Install seal and retainer on lever.
3. Install knob on the lever.