Usage:
start by:
a) separation of track
1. Loosen bolts (3) and (4) on both sides of front idler.
2. Remove four bolts (6) from rod assembly. Remove spacer (2).
3. Pull the front idler forward to the front of the track roller frame.
4. Remove bolts (5) that hold hydraulic track adjuster to rod assembly (1).
5. Remove rod assembly (1).
6. Check the seal and ring in the hydraulic track adjusting cylinder. If parts have damage, use new parts for replacement.
Install Front Idler Rod Assemblies
1. Install a new ring and seal in the hydraulic track adjuster.
2. Put the rod assembly (1) in position on the hydraulic track adjuster. Install the bolts that hold the rod assembly in position.
3. Push the front idler in position. Install the spacer and four bolts that hold the front idler to the rod assembly.
4. Make sure the front idler is in the correct position on the track roller frame. See INSTALL FRONT IDLERS.
end by:
a) connection of tracks