C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Flywheel - Remove

Usage:

631E 1AB

拆卸步骤

表 1
需要的工具 
工具  零件号  零件名称  数量 
导向螺柱
(5/8 - 18 UNF X 8 1/2 in) 


    图 1g01115663

  1. 卸下一个螺栓 (1)。 将工具 (A) 安装到飞轮上。 使用适当的起吊设备托住飞轮。 飞轮 (2) 的重量约为 68 kg (150 lb)

  2. 卸下将飞轮固定在曲轴上的其余螺栓 ( 1)。 拆卸飞轮 (2)。

  3. 拆卸工具 (A)。

  4. 如有必要,使用锤子和冲头,从飞轮 ( 2) 上卸下齿圈 (3)。

Caterpillar Information System:

2003/12/01 Parts List for Prelube Pump Group Kits {1319}
Installation Instructions for the 240-0717 Engine Oil Lines Gp for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307} Installation Instructions for the 240-0717 Engine Oil Lines Gp for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307}
C18 Marine Auxiliary Engines E363 High Fuel Temperature
C18 Marine Auxiliary Engines E362 Engine Overspeed
C18 Marine Auxiliary Engines E361 High Engine Coolant Temperature
C13, C15, and C18 Generator Set Engines E360 Low Engine Oil Pressure
C13, C15, and C18 Generator Set Engines E199 Low Coolant Temperature
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped
C18 Marine Auxiliary Engines E198 Low Fuel Pressure
C9 Marine Auxiliary and Marine Generator Set Engines Diagnostic Codes
C13, C15, and C18 Generator Set Engines E197 High Engine Oil Temperature
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - Equipped with Rear Power Take-Off
C9 Marine Auxiliary and Marine Generator Set Engines Injection Actuation Pressure Control Valve Circuit - Test
Troubleshooting for Marine Engine Electronic Displays Messenger - Test
G3500 Engines Detonation Retard and Detonation Shutdown
2004/02/01 Improved Software Has Been Released For The C7 On-Highway Truck Engine {7620}
C18 Marine Auxiliary Engines Analog Sensor Supply Circuit - Test
C18 Marine Auxiliary Engines Switch Circuits - Test
C15 and C18 Engines for Caterpillar Built Machines Engine Support (Front) - Remove and Install
C18 Marine Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.