2003/12/01 Caterpillar


Parts List for Prelube Pump Group Kits {1319}

Usage:

3616 1PD
Engine:
3516 (S/N: 4XF1-UP; 9KF1-UP; 4MJ1-UP; 5SJ1-UP; 25Z1-UP; 27Z1-UP; 28Z1-UP; 29Z1-UP; 71Z1-UP; 72Z1-UP; 73Z1-UP)
3516B (S/N: BCK1-UP)
3606 (S/N: 8RB1-UP)
3608 (S/N: 6MC1-UP; 8LL1-UP; 7WR1-UP)
3612 (S/N: 9RC1-UP)
3616 (S/N: 1PD1-UP)
3618 (S/N: 2MW1-UP)
G3516 (S/N: 3RC1-UP; 8LD1-UP; 4EK1-UP; 5PN1-UP)
G3606 (S/N: 3XF1-UP)
G3608 (S/N: 4WF1-UP)
G3612 (S/N: 1YG1-UP)
G3616 (S/N: BLB1-UP; 4CG1-UP)
Engine News SEBD9231, January 1996, "Parts List for Prelube Pump Group Kits". Disregard this article. Corrections have been made to the original document. The correct information follows.

Description of Change: The parts list has changed due to new part numbers.

Adaptable To: The following prelube pumps are used with 3500 and 3600 Commercial Engines: 9Y-6016 Prelubrication Pump Gp, 9Y-9992 Prelubrication Pump Gp, 9Y-9993 Prelubrication Pump Gp and 9Y-9995 Prelubrication Pump Gp .

Table 1 lists the parts for the 9Y-6016 Prelubrication Pump Gp.

Table 1
9Y-6016 Prelubrication Pump Gp    
Qty     Serviceable Part     Serviceable Part in Kit     Qty    
1     128-2808 Prelubrication Pump Kit     106-5029 Needle Bearing As     4    
129-6306 Lip Seal 1    
129-6307 Gasket 3    
129-6308 Needle Roller 1    
129-6311 Retaining Ring 4    
129-6312 Ball 1    
1     128-2809 Prelubrication Pump Kit     129-6313 Oil Pump Drive Shaft     1    
129-6314 Shaft  (1) 1    
1     128-2810 Prelubrication Pump Kit    
1     128-3543 Motor As    
1     128-3548 Gear Pump Assembly    
( 1 ) The driven shaft can only be obtained with the kit.
Table 2 lists the parts for the following pump groups: 9Y-9992 Prelubrication Pump Gp, 9Y-9993 Prelubrication Pump Gp and 9Y-9995 Prelubrication Pump Gp.

Table 2
9Y-9992 Prelubrication Pump Gp
9Y-9993 Prelubrication Pump Gp
9Y-9995 Prelubrication Pump Gp    
Qty     Serviceable Part     Serviceable Part in Kit     Qty    
1     128-2759 Pump Repair Kit     106-5029 Needle Bearing As     4    
127-6930 Dowel Pin 1    
129-6306 Lip Seal 1    
129-6307 Gasket 3    
129-6311 Retaining Ring 4    
129-6312 Ball 1    
1     128-2760 Pump Shaft Kit     129-6315 Driver Shaft     1    
129-6316 Driven Shaft 1    
1     128-2761 Pump Gear Kit    
1     128-3543 Motor As  (1)    
1     128-3544 Motor As  (1)    
1     128-3545 Motor As  (1)    
1     128-3547 Gear Pump Assembly    
( 1 ) 9Y-9992 Prelubrication Pump Gp uses 128-3543 Motor As. 9Y-9993 Prelubrication Pump Gp uses 128-3544 Motor As. 9Y-9995 Prelubrication Pump Gp uses 128-3545 Motor As .
Table 3 lists the usage of the prelube pumps.

Table 3
Usage    
Sales Model     Serial Number     9Y-6016 Prelubrication Pump Gp     9Y-9992 Prelubrication Pump Gp     9Y-9993 Prelubrication Pump Gp     9Y-9995 Prelubrication Pump Gp    
3606     (S/N: 8RB1-UP)     X     X     X     X    
3608     (S/N: 6MC1-UP)     X     X     X     X    
3612     (S/N: 9RC1-UP)     X     X     X     X    
3616     (S/N: 1PD1-UP)     X     X     X     X    
G3606     (S/N: 3XF1-UP)     X     X     X     X    
G3608     (S/N: 4WF1-UP)     X     X     X     X    
G3612     (S/N: 1YG1-UP)     X     X     X     X    
G3516     (S/N: 4CG1-UP)     X     X     X     X    
3516     (S/N: 9KF1-UP)     X                
G3516     (S/N: 4EK1-UP)     X                
G3516     (S/N: 5PN1-UP)     X                
3516B     (S/N: BCK1-UP)     X                
G3616     (S/N: BLB1-UP)                 X    
3618     (S/N: 2MW1-UP)                 X    
3608     (S/N: 8LL1-UP)                 X    
3608     (S/N: 7WR1-UP)                 X    

Caterpillar Information System:

Installation Instructions for the 240-0717 Engine Oil Lines Gp for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307} Installation Instructions for the 240-0717 Engine Oil Lines Gp for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307}
C18 Marine Auxiliary Engines E363 High Fuel Temperature
C18 Marine Auxiliary Engines E362 Engine Overspeed
C18 Marine Auxiliary Engines E361 High Engine Coolant Temperature
C13, C15, and C18 Generator Set Engines E360 Low Engine Oil Pressure
C13, C15, and C18 Generator Set Engines E199 Low Coolant Temperature
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped
C18 Marine Auxiliary Engines E198 Low Fuel Pressure
C9 Marine Auxiliary and Marine Generator Set Engines Diagnostic Codes
C13, C15, and C18 Generator Set Engines E197 High Engine Oil Temperature
G3500 Engines Detonation Sensors
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install - Equipped with Rear Power Take-Off
C9 Marine Auxiliary and Marine Generator Set Engines Injection Actuation Pressure Control Valve Circuit - Test
Troubleshooting for Marine Engine Electronic Displays Messenger - Test
G3500 Engines Detonation Retard and Detonation Shutdown
2004/02/01 Improved Software Has Been Released For The C7 On-Highway Truck Engine {7620}
C18 Marine Auxiliary Engines Analog Sensor Supply Circuit - Test
C18 Marine Auxiliary Engines Switch Circuits - Test
C15 and C18 Engines for Caterpillar Built Machines Engine Support (Front) - Remove and Install
C18 Marine Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.