Prelube Pump
Show/hide table
Illustration 1 | g00986172 |
Typical example |
Note: Lubricate the bores for the O-ring seals with engine oil.
(1) Oil pressure switch
- Normal contact position below deactuation pressure ... closed
- Actuation pressure ...
275 ± 30 kPa (40 ± 4 psi) - Minimum deactuation pressure ...
245 kPa (35 psi) - Torque ...
22 ± 3 N·m (16 ± 2 lb ft) - Operating temperature ...
−40 to 121 °C (−40 to 250 °F) - Actuation pressure ...
(2) Screw
- Torque ...
1.7 ± 0.3 N·m (15 ± 3 lb in)
(3) Reducer bushing
(4) Connector
Use Teflon tape on the threads of bushing (3) and connector (4).
(5) Prelube pump
- Flow at 1750 rpm and
345 kPa (50 psi) of pressure ...3.8 L/min (1 US gpm)
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
2003/12/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
G3500 Engines Control Panel
C9 Marine Auxiliary and Marine Generator Set Engines Analog Sensor Supply Circuit - Test
C1.5 and C2.2 Generator Sets Reference Material
C18 Generator Sets Generator Set - Test
C27 and C32 Generator Set Engines E264 Emergency Stop Activated
C13, C15, and C18 Generator Set Engines E255 Diagnostic Reset
3406E Engine Engine Oil Filter Base - Assemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Disassemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Install - Engine with BrakeSaver
2003/12/01 The Function of Monitoring the Aftercooler Coolant Level on Certain Gas Generator Sets Has Changed {1063, 1395}
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove
C15 and C18 Industrial Engines Fuel Transfer Pump - Install
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408} Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
2004/01/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
EMCP3 Annunciator Module
C-15 Petroleum Engine Electronic Unit Injector Rocker Arm
3054E Industrial Engine Engine Oil Pressure - Test
EMCP3 Thermocouple Module
G3500 Engines Refill Capacities and Recommendations