Engine Oil Filter Base - Assemble - Engine with BrakeSaver
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| |
| Illustration 1 | g01040736 |
- Install the plunger and spring (2) in the engine oil filter base.
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install cover (1) on the engine oil filter base.
End By:
- Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar Information System:
3406E Engine Engine Oil Filter Base - Disassemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Install - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Remove - Engine with BrakeSaver
C1.5 and C2.2 Generator Sets Refill Capacities and Recommendations
2004/02/01 Installation and Removal of the Cat Brake Connector {1105}
2004/01/01 A New Shield is used for the Seal on the Aftercooler {1063}
3500 Marine Engines Turbocharger
C3.3 Industrial Engine Alternator - Install
C3.3 Industrial Engine Alternator - Remove
C32 Marine Engine Alternator Mounting
2004/03/01 A New Aftercooler Core is Used {1063, 1064}
C3.3 Industrial Engine Fan Drive - Remove and Install
C13, C15, and C18 Generator Set Engines E255 Diagnostic Reset
C27 and C32 Generator Set Engines E264 Emergency Stop Activated
C18 Generator Sets Generator Set - Test
C1.5 and C2.2 Generator Sets Reference Material
C9 Marine Auxiliary and Marine Generator Set Engines Analog Sensor Supply Circuit - Test
G3500 Engines Control Panel
2003/12/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Install
G3500 Engines Prelube Pump
2003/12/01 The Function of Monitoring the Aftercooler Coolant Level on Certain Gas Generator Sets Has Changed {1063, 1395}
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove