E264 Emergency Stop Activated
产生此代码的情况:
电子控制模块（ECM）检测到至 ECM 的紧急停机输入开路。
系统响应:
ECM 停止向喷油器电磁阀发送喷油信号。
可能对性能的影响:
发动机将停机。
测试步骤 1. 核实紧急停机关闭的原因
- 与操作员沟通，确定紧急停机关闭的原因。
- 核实引起紧急停机关闭的条件已排除。
预期结果:
紧急停机关闭的原因已确定。 紧急停机关闭的原因已排除。
结果:
- 正常 - 紧急停机关闭的原因已确定。 紧急停机关闭的原因已排除。
修复: 可通过执行以下步骤复位紧急停机的条件：
- 将紧急停机开关复位至 OFF 位置。
- 通断循环至 ECM 的供电。 如果安装有 "Diagnostic Reset（诊断复位）"开关，扳动 "Diagnostic Reset（诊断复位）"开关，以在不切断 ECM 电源的情况下清除紧急停机条件。
停止
Caterpillar Information System:
C13, C15, and C18 Generator Set Engines E255 Diagnostic Reset
3406E Engine Engine Oil Filter Base - Assemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Disassemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Install - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Remove - Engine with BrakeSaver
C1.5 and C2.2 Generator Sets Refill Capacities and Recommendations
2004/02/01 Installation and Removal of the Cat Brake Connector {1105}
2004/01/01 A New Shield is used for the Seal on the Aftercooler {1063}
3500 Marine Engines Turbocharger
C3.3 Industrial Engine Alternator - Install
C3.3 Industrial Engine Alternator - Remove
C32 Marine Engine Alternator Mounting
C18 Generator Sets Generator Set - Test
C1.5 and C2.2 Generator Sets Reference Material
C9 Marine Auxiliary and Marine Generator Set Engines Analog Sensor Supply Circuit - Test
G3500 Engines Control Panel
2003/12/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Install
G3500 Engines Prelube Pump
2003/12/01 The Function of Monitoring the Aftercooler Coolant Level on Certain Gas Generator Sets Has Changed {1063, 1395}
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove
C15 and C18 Industrial Engines Fuel Transfer Pump - Install
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408} Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}