Engine Oil Filter Base - Remove - Engine with BrakeSaver
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 2P-8250 | Strap Wrench Assembly | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove plug (1) and drain the oil from the engine oil filter base into a suitable container for storage or disposal.
- Use Tooling (A) to remove oil filter (6).
- Disconnect hose assemblies (4) and (5).
- Remove bolts (3) that hold the engine oil filter base to the bracket.
- Remove engine oil filter base (2).
Show/hide table
Illustration 1 | g01040684 |
Caterpillar Information System:
C1.5 and C2.2 Generator Sets Refill Capacities and Recommendations
2004/02/01 Installation and Removal of the Cat Brake Connector {1105}
2004/01/01 A New Shield is used for the Seal on the Aftercooler {1063}
3500 Marine Engines Turbocharger
C3.3 Industrial Engine Alternator - Install
C3.3 Industrial Engine Alternator - Remove
C32 Marine Engine Alternator Mounting
2004/03/01 A New Aftercooler Core is Used {1063, 1064}
C3.3 Industrial Engine Fan Drive - Remove and Install
C-18 Truck Engines Refill Capacities and Recommendations
C1.5 and C2.2 Generator Sets Plate Locations and Film Locations
C32 Marine Engine Instrument Gauge
3406E Engine Engine Oil Filter Base - Install - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Disassemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Assemble - Engine with BrakeSaver
C13, C15, and C18 Generator Set Engines E255 Diagnostic Reset
C27 and C32 Generator Set Engines E264 Emergency Stop Activated
C18 Generator Sets Generator Set - Test
C1.5 and C2.2 Generator Sets Reference Material
C9 Marine Auxiliary and Marine Generator Set Engines Analog Sensor Supply Circuit - Test
G3500 Engines Control Panel
2003/12/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Install