3406E Engine Caterpillar


Engine Oil Filter Base - Install - Engine with BrakeSaver

Usage:

3406E 5EK

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
2P-8250  Strap Wrench Assembly 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01040684

  1. Ensure that the O-ring seals are in position on the engine oil filter base. Position oil filter base (2) on the bracket.

  2. Install bolts (3) that hold the engine oil filter base to the bracket.

  3. Connect hose assemblies (4) and (5).

  4. Install plug (1).

  5. Use Tooling (A) to install oil filter (6).

  6. Fill with engine oil.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.