Fuel Transfer Pump - Install
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件说明 | 数量 |
A | 155-0695 | 螺纹锁固胶 | - |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将 O 形密封圈 (5) 安装在输油泵 (1) 上。 用清洁的发动机机油润滑 O 形密封圈。
- 将输油泵 (1) 安置在适配器中。 安装螺栓 (4)。
- 将软管组件 (2) 和软管组件 (3) 连接到输油泵上。
- 将 O 形密封圈 (8) 安装在盖 (6) 上。 用清洁的发动机机油润滑 O 形密封圈。
- 将盖 (6) 定位到前壳体上。 将工具 (A) 涂抹在螺栓 (7) 上。 安装螺栓 (7),并拧紧至扭矩为
30 ± 5 N·m (22 ± 4 lb ft) 。 - 将供油开关置于“接通”位置。
- 排出燃油系统中的空气。 请参阅测试与调整, "燃油系统 - 预注"。
Show/hide table
图 1 | g01041378 |
Caterpillar Information System:
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove
2003/12/01 The Function of Monitoring the Aftercooler Coolant Level on Certain Gas Generator Sets Has Changed {1063, 1395}
G3500 Engines Prelube Pump
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
2003/12/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
G3500 Engines Control Panel
C9 Marine Auxiliary and Marine Generator Set Engines Analog Sensor Supply Circuit - Test
C1.5 and C2.2 Generator Sets Reference Material
C18 Generator Sets Generator Set - Test
C27 and C32 Generator Set Engines E264 Emergency Stop Activated
C13, C15, and C18 Generator Set Engines E255 Diagnostic Reset
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408} Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
2004/01/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
EMCP3 Annunciator Module
C-15 Petroleum Engine Electronic Unit Injector Rocker Arm
3054E Industrial Engine Engine Oil Pressure - Test
EMCP3 Thermocouple Module
G3500 Engines Refill Capacities and Recommendations
C9 Marine Auxiliary and Marine Generator Set Engines CAN Data Link Circuit - Test
2003/12/01 A Special Instruction, REHS1809 , "Instillation Procedure for 156-7106 Injector Wiring Harness Kit " {1254, 1290, 1408}
2003/12/01 A Special Instruction, REHS1809 , "Installation Procedure for 156-7106 Injector Wiring Harness Kit " {1254, 1290, 1408}