Electronic Unit Injector Rocker Arm
Show/hide table
 | |
| Illustration 1 | g01041551 |
(1) Bore in the rocker arm bearing for the rocker arm shaft
- New parts ... 40.065 ± 0.015 mm (1.5774 ± 0.0006 inch)
- Maximum dimension for worn parts ... 40.193 mm (1.5824 inch)
The rocker arm bearing must not extend beyond either face of the rocker arm.
(2) Location of the bearing joint
Caterpillar Information System:
EMCP3 Annunciator Module
2003/12/15 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2004/01/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408} Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
C15 and C18 Industrial Engines Fuel Transfer Pump - Install
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove
2003/12/01 The Function of Monitoring the Aftercooler Coolant Level on Certain Gas Generator Sets Has Changed {1063, 1395}
G3500 Engines Prelube Pump
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
2003/12/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
3054E Industrial Engine Engine Oil Pressure - Test
EMCP3 Thermocouple Module
G3500 Engines Refill Capacities and Recommendations
C9 Marine Auxiliary and Marine Generator Set Engines CAN Data Link Circuit - Test
2003/12/01 A Special Instruction, REHS1809 , "Instillation Procedure for 156-7106 Injector Wiring Harness Kit " {1254, 1290, 1408}
2003/12/01 A Special Instruction, REHS1809 , "Installation Procedure for 156-7106 Injector Wiring Harness Kit " {1254, 1290, 1408}
EMCP3 Resistive Temperature Device Module
C18 Marine Auxiliary Engines CAT Data Link Circuit - Test
Installation of the 246-3256 Parts Kit (TACHOMETER) {7450, 7462, 7497} Installation of the 246-3256 Parts Kit (TACHOMETER) {7450, 7462, 7497}
2004/01/01 Improved Flash Files are Available {7620}
EMCP3 Diagnostic Trouble Code List
C12 Marine Engines Safety Messages