Crankshaft Wear Sleeve (Front) - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装一个新的曲轴前油封 (3) 。 请参阅本解体和组装手册, "曲轴前油封 - 安装"。
Show/hide table
 | |
| 图 1 | g01021717 |
- 彻底清洁曲轴皮带轮 (1) 。
- 安装曲轴承磨衬套（前） (2) 。 请参阅曲轴承磨衬套（前） (2) 套件的安装信息。
注: 将曲轴承磨衬套（前） (2) 安装至曲轴皮带轮 (1) 以后，无需从曲轴承磨衬套（前）拆卸法兰 (4) 。
End By: 安装曲轴皮带轮。 请参阅本 解体和组装手册, "曲轴皮带轮 - 拆卸和安装"。
Caterpillar Information System:
C3.3 Industrial Engine Crankshaft Wear Sleeve (Front) - Remove
C9 Industrial Engines Engine Oil Pressure Sensor
2003/12/01 A New Integral Seal Provides Improved Sealing {7555}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Product Lifting
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Stopping
3512C and 3516C Marine Auxiliary and Generator Set Engines Emergency Stopping
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Electronics
3512C and 3516C Marine Auxiliary and Generator Set Engines Electrical System
2003/09/15 A New Integral Seal Provides Improved Sealing {7555}
C4.4 Industrial Engine Cooling System - Test
3606 and 3608 Engines Exhaust Manifold Shield - Remove and Install
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620} Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
C3.3 Industrial Engine Front Cover - Remove and Install
C3.3 Industrial Engine Housing (Front) - Remove
2003/11/01 The Alternator Guard has been Redesigned {7168}
2003/09/01 New Software Is Used on Product Link 151/201 {7606, 7620}
C15 On-Highway Engines Fuel System
2003/09/01 Improved Water Pump Seal {7555}
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 On-highway Engine Engine Support (Front) - Remove and Install
Troubleshooting Marine Engine Cooling Systems{1350} Troubleshooting Marine Engine Cooling Systems{1350}
C15 and C18 Engines for Caterpillar Built Machines General Information
C15 On-Highway Engines Fuel System - Prime