A New Integral Seal Provides Improved Sealing {7555}
- Marine Engine:
- 3408
- 3412
- Generator Set:
- 3408
- 3412
- Industrial Engine:
- 3408
- 3412
Description of Change: A new integral seal has been introduced for all 3408 and 3412 industrial engines, generator set engines, and marine engines. The new seal can be used on the engines in order to improve the sealing capabilities for the following components:
- Flywheel housing covers
- Crankcase side covers
- Engine oil lines
Note: The new seal should not be used in order to seal engine coolant.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g01020526 |
The new 234-8937 Integral Seal is a direct replacement for the former 4N-0933 Gasket. The 234-8937 Integral Seal is a rubber seal that has improved sealing capabilities for sealing engine lubricants. The 4N-0933 Gasket is a paper gasket. The 4N-0933 Gasket will remain available for use in cooling systems and other applications.
Caterpillar Information System:
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Product Lifting
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Stopping
3512C and 3516C Marine Auxiliary and Generator Set Engines Emergency Stopping
3508B, 3512B, and 3516B High Displacement Generator Sets Engine Electronics
3512C and 3516C Marine Auxiliary and Generator Set Engines Electrical System
2003/09/15 A New Integral Seal Provides Improved Sealing {7555}
C4.4 Industrial Engine Cooling System - Test
3606 and 3608 Engines Exhaust Manifold Shield - Remove and Install
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620} Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Safety Messages
C15 On-highway Engine Cylinder Head - Install
Pressure Requirements for the Fuel Transfer System{1256} Pressure Requirements for the Fuel Transfer System{1256}
C9 Industrial Engines Engine Oil Pressure Sensor
C3.3 Industrial Engine Crankshaft Wear Sleeve (Front) - Remove
C3.3 Industrial Engine Crankshaft Wear Sleeve (Front) - Install
C3.3 Industrial Engine Front Cover - Remove and Install
C3.3 Industrial Engine Housing (Front) - Remove
2003/11/01 The Alternator Guard has been Redesigned {7168}
2003/09/01 New Software Is Used on Product Link 151/201 {7606, 7620}
C15 On-Highway Engines Fuel System
2003/09/01 Improved Water Pump Seal {7555}
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Disassemble
C15 On-highway Engine Engine Support (Front) - Remove and Install