Housing (Front)
Show/hide table
| |
| 图 1 | g01521174 |
|
典型实例 | |
注: 安装之前，先将 155-0695 螺纹锁固胶涂抹在螺柱 (1) 的螺纹上。
(2)按照以下步骤以拧紧将盘固定到缸体上的螺栓。
- 将八个锁紧螺栓拧紧至
55 ± 10 N·m (41 ± 7 lb ft) 。 - 再次拧紧八个锁紧螺栓至
55 N·m (41 lb ft) 。
Show/hide table
| |
| 图 2 | g01521620 |
|
右视图 | |
(3)组装期间，壳体的后表面和缸体的前表面上绝不能有机油、燃油、水、污垢、组装胶以及任何其他污染物。
注: 组装之后，修剪密封垫并使密封垫和壳体表面平齐。
注: 涂抹 8T-9022 硅胶密封垫 以便填充前壳体、油底壳密封垫和缸体结合处的缝隙。
Show/hide table
| |
| 图 3 | g01521621 |
注: 只有拧紧了两个螺母 ( 5) 之后，才能拧紧 12 个平头螺钉 (4)。
(4) 12 个平头螺钉的扭矩 ...
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines Camshaft Bearings - Remove
C15 Engine Engine Protection Plans
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C13 and C15 On-Highway Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C11 and C13 Engines Cylinder Head - Install
C15 Engine Cooling System Coolant (ELC) - Change
C15 Engine Cooling System Coolant (DEAC) - Change
C11 and C13 Engines Cylinder Head - Remove
C11, C13, and C15 On-highway Engines Engine Operation
C11, C13, and C15 On-highway Engines Cold Start Strategy
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
3408C, 3412C and 3412D High Performance Marine Engines Crankshaft
Cat® Digital Voltage Regulator Unstable Voltage - Troubleshoot
Cat® Digital Voltage Regulator No Voltage Droop - Troubleshoot
C15 On-Highway Engine Flywheel Housing
Cat® Digital Voltage Regulator No Line Loss Compensation - Troubleshoot
Cat® Digital Voltage Regulator Poor Voltage Regulation - Troubleshoot
2003/08/01 Use the Correct Front Housing Bolts {1151}
3408C, 3412C and 3412D High Performance Marine Engines Cylinder Liner
C11 and C13 Engines for Caterpillar Built Machines Camshaft Bearings - Install
345B Excavator Swing Drive Oil Sample - Obtain
3500B Series II Marine Engines Digital Sensor Supply
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Install
2003/08/01 New Oil Pump with a Longer Service Life {1304}