Cylinder Head - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 138-7575     | 连接支架     | 2     |
开始:
- 拆卸风扇驱动装置支架总成。 请参考解体及组装, "风扇驱动装置支架总成 - 拆卸和安装"。
- 拆卸气门室盖座。 请参考解体及组装, "气门室罩盖座 - 拆卸和安装"。
- 拆卸涡轮增压器。 请参考解体及组装, "涡轮增压器 - 拆卸"。
- 拆卸电子单体喷油器。 请参考解体及组装, "电子单体喷油器 - 拆卸"。
- 拆卸预冷器。 请参考解体及组装, "预冷器 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 拆卸管组件 (1) 。 断开软管组件 (2) 。 切断所有连接线束组件 (3) 到缸盖的电缆带。 将线束组件移到一边。
Show/hide table
图 1 | g01018266 |
- 断开软管组件 (5) 和 (6) 。 从气缸盖断开卡箍 (4) 。 拆卸螺栓 (7) 。
Show/hide table
图 2 | g01018267 |
- 断开下列各个零件: 夹子 (8), 电线组件 (10) 和 传感器 ( 12) 的线束组件. 从气缸盖上断开软管组件 (9) 。 拆卸螺栓 (11) 。
Show/hide table
图 3 | g01018269 |
- 断开线束组件 (14) .
Show/hide table
图 4 | g01018271 |
- 缸盖缸盖螺栓 (19) 。
Show/hide table
图 5 | g01018505 |
- 将工具 (A) 和适当提升设备连接到缸盖。 从缸体上小心拆卸缸盖。 缸盖的重量约为 184 kg (405 lb)。
Caterpillar Information System:
C11, C13, and C15 On-highway Engines Engine Operation
C11, C13, and C15 On-highway Engines Cold Start Strategy
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
3408C, 3412C and 3412D High Performance Marine Engines Crankshaft
Cat® Digital Voltage Regulator High Voltage - Troubleshoot
Cat® Digital Voltage Regulator Low Voltage - Troubleshoot
3406C Engines for Caterpillar Built Machines Engine Oil Filter Base
Application Guideline for the Bellows{1061} Application Guideline for the Bellows{1061}
2003/09/01 A New Bracket Reduces Vibration on the Air Silencer {1468}
C13, C15, and C18 Tier 4 Final Engines Camshaft
Cat® Digital Voltage Regulator No Voltage - Troubleshoot
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C15 Engine Cooling System Coolant (DEAC) - Change
C15 Engine Cooling System Coolant (ELC) - Change
C11 and C13 Engines Cylinder Head - Install
C13 and C15 On-Highway Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C15 Engine Engine Protection Plans
C11 and C13 Engines for Caterpillar Built Machines Camshaft Bearings - Remove
C15 Petroleum Generator Set Engines Housing (Front)
Cat® Digital Voltage Regulator Unstable Voltage - Troubleshoot
Cat® Digital Voltage Regulator No Voltage Droop - Troubleshoot
C15 On-Highway Engine Flywheel Housing
Cat® Digital Voltage Regulator No Line Loss Compensation - Troubleshoot