Track Roller Mounting
Show/hide table
Illustration 1 | g00760359 |
Clearance "A" between the track carrier roller (1) and the mounting bracket must be 7.0 ± 0.5 mm (0.28 ± 0.02 inch).
(2) During assembly, the surfaces must be clean and free of the protective layer.
(3) The track rollers must be installed so that the plugs face outward.
Caterpillar Information System:
3056E Industrial Engine Front Cover - Remove and Install
C7 Engines for Combat and Tactical Vehicles 0252-12 Personality Module Fault (52)
C9 Urban Transit Bus Engine Electronic Control System Components
C18 Generator set and C18 Marine Engines Aftercooler - Install
C18 Generator set and C18 Marine Engines Aftercooler - Remove
3056E Industrial Engine Crankshaft Front Seal - Install
C18 Generator set and C18 Marine Engines Exhaust Manifold - Remove and Install
2002/11/25 New Cover Seals are Available {1107, 1201, 1316, 1317, 1336}
3056E Industrial Engine Crankshaft Front Seal - Remove
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Track Roller (Single Flange)
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Track Roller (Single Flange)
C7 and C9 On-Highway Engines 0100-01 Low Oil Pressure Warning (46)
C7 On-highway Engine Air Inlet Elbow
3056E Industrial Engine Housing (Front) - Install
3056E Industrial Engine Housing (Front) - Remove
3056E Industrial Engine Water Temperature Regulator - Remove and Install
C7 Petroleum Engines General Information
3056E Industrial Engine Water Outlet Manifold - Remove and Install
3500B Engines Thermostatic Valve
G3500B Engines Water Temperature Regulator
C15 On-highway Engine Fuel Filter Lines
C7 Petroleum Engines Air Inlet and Exhaust System
3056E Industrial Engine Water Pump - Remove and Install
3126B Marine Engines CID 0102 FMI 03 Boost Pressure Sensor short to +batt