Crankshaft Front Seal - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9U-6210 | Front Seal Installer | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the housing for the crankshaft front seal and inspect the housing for damage.
- Lubricate the lip of the crankshaft front seal with clean engine oil.
Show/hide table
Illustration 1 g00541748 - Place crankshaft front seal assembly (1) into the housing.
Show/hide table
NOTICE Ensure that the lip of the crankshaft front seal that is spring loaded is facing toward the inside of the front housing and that it is square with the bore of the housing for the crankshaft front seal.
Show/hide tableIllustration 2 g00940167 - Use Tooling (A) to install crankshaft front seal (1) to a depth of
10.20 to 10.70 mm (0.402 to 0.421 inch) from the front face of housing (2). - Apply clean engine oil on the area of the crankshaft pulley that will be in contact with crankshaft front seal (1).
End By:
- Install the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper - Install".
Caterpillar Information System:
C18 Generator set and C18 Marine Engines Exhaust Manifold - Remove and Install
2002/11/25 New Cover Seals are Available {1107, 1201, 1316, 1317, 1336}
3056E Industrial Engine Crankshaft Front Seal - Remove
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Track Roller (Single Flange)
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Track Roller (Single Flange)
C7 and C9 On-Highway Engines 0100-01 Low Oil Pressure Warning (46)
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Track Roller (Double Flange)
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Track Roller (Single Flange)
C7 Engines for Caterpillar Built Machines Cylinder Head
2002/11/01 Parts Manuals For The Following Engines Are Now Provided On A CD-ROM {1000}
C18 Generator set and C18 Marine Engines Water Temperature Regulator - Remove and Install
C18 Generator set and C18 Marine Engines Engine Oil Pan - Remove and Install
C18 Generator set and C18 Marine Engines Aftercooler - Remove
C18 Generator set and C18 Marine Engines Aftercooler - Install
C9 Urban Transit Bus Engine Electronic Control System Components
C7 Engines for Combat and Tactical Vehicles 0252-12 Personality Module Fault (52)
3056E Industrial Engine Front Cover - Remove and Install
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Track Roller Mounting
C7 On-highway Engine Air Inlet Elbow
3056E Industrial Engine Housing (Front) - Install
3056E Industrial Engine Housing (Front) - Remove
3056E Industrial Engine Water Temperature Regulator - Remove and Install
C7 Petroleum Engines General Information
3056E Industrial Engine Water Outlet Manifold - Remove and Install