Lifter Group - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1U-7262     | 伸缩磁铁     | 1     |
开始:
- 拆下凸轮轴。 请参阅拆解和组装, "凸轮轴 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) ,拆下气门挺杆 (1) 。
注: 在气门挺杆上做一个识别标记以便安装。
Show/hide table
图 1 | g00540954 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1U-7262     | 伸缩磁铁     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将气门挺杆安装到缸体前,用清洁的机油润滑气门挺杆。
- 使用工具 (A) ,安装气门挺杆 (1) 。
注: 确保气门挺杆安装在原位置,且挺杆正确就座。
Show/hide table
图 2 | g00540954 |
End By: 安装凸轮轴。 请参阅 拆解和组装, "凸轮轴 - 拆卸和安装"。
Caterpillar Information System:
2003/08/01 New Flywheels Are Used {1156}
770 and 772 Off-Highway Truck Chassis Electronic Control System Speed Sensor - Adjust
2002/11/01 New Software Helps Eliminate Erroneous Logging Of Diagnostic Codes {7620}
2003/01/01 New Fuel Injector Groups are Used {1254, 1280}
2003/02/01 Some Of The Tees In Some Breather Groups May Be Damaged By Normal Operation {1317}
3056E Industrial Engine Rocker Shaft - Assemble
797 Off-Highway Truck Braking System Visual Inspection
320D Excavator Daily Inspection
C18 Marine Engines Diagnostic Flash Code Retrieval
120H and 135H Motor Graders Machine Systems Circle Drive - Assemble
120H and 135H Motor Graders Machine Systems Circle Drive - Disassemble
3056E Industrial Engine Rocker Shaft and Pushrod - Install
2002/12/01 The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
3054E Industrial Engine Engine Oil Pump
2003/04/01 Procedure for Tightening the Locknut for the Fan Drive on 3500 Engines {1359}
2003/02/01 New Turbocharger Oil Lines Group is Now Available {1052}
2003/02/01 A New Cylinder Head Gp For G3412 Engines {1101}
2003/04/01 New Water Pumps for 3500 Engines {1361, 1389}
2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
3056E Industrial Engine Camshaft - Remove and Install
2003/03/01 New Cylinder Head Groups and New Prechamber Groups With 1/2-13 Standard Bolts Are Available {1100}
2003/01/01 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/01/06 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
G3408C and G3412C Engines Valve Mechanism