2003/08/01 Caterpillar


New Flywheels Are Used {1156}

Usage:

3512 1LM
Electric Power Generation:
G3520B (S/N: CWD1-UP; GET1-UP; BGW1-UP)
G3520C (S/N: HEA1-UP; HEB1-UP; CWW1-UP; CWY1-UP)
Engine:
3508 (S/N: CNF1-UP; 6TJ1-UP; PTK1-UP; 8TL1-UP; 3HM1-UP; 5XM1-UP; 9WN1-UP; 3LS1-UP; CAW1-UP; 5PW1-UP; 95Y1-UP; 96Y1-UP; 97Y1-UP; 23Z1-UP; 68Z1-UP; 69Z1-UP; 70Z1-UP)
3508B (S/N: CBB1-UP; CNB1-UP; 7AF1-UP; BAG1-UP; 2BM1-UP; 3DM1-UP; 4GM1-UP; 7SM1-UP; PTN1-UP; 6PN1-UP; 5PS1-UP; 1TW1-UP; 2HW1-UP; 3DW1-UP; 5KW1-UP; BGX1-UP; BPX1-UP)
3512 (S/N: PTG1-UP; PTH1-UP; CMJ1-UP; 2WK1-UP; 1LM1-UP; 6PM1-UP; FDR1-UP; 3MS1-UP; 6WW1-UP; 49Y1-UP; 50Y1-UP; 51Y1-UP; 24Z1-UP; 65Z1-UP; 66Z1-UP; 67Z1-UP)
3512B (S/N: BRC1-UP; CMC1-UP; 2RD1-UP; FDE1-UP; BLF1-UP; PTF1-UP; 2AF1-UP; 8DF1-UP; AAG1-UP; PWG1-UP; BRK1-UP; PTM1-UP; 7HM1-UP; 8EM1-UP; 8RM1-UP; BRN1-UP; 4TN1-UP; 6WN1-UP; 4DR1-UP; 1PW1-UP; 2GW1-UP; 3ZW1-UP; 4AW1-UP; 5AW1-UP; 6GW1-UP; 2EZ1-UP)
3516 (S/N: CMD1-UP; 9KF1-UP; 5SJ1-UP; CAL1-UP; 7KM1-UP; 2TS1-UP; 3JS1-UP; 3NS1-UP; 8TW1-UP; 25Z1-UP; 27Z1-UP; 28Z1-UP; 29Z1-UP; 71Z1-UP; 72Z1-UP; 73Z1-UP)
3516B (S/N: CAA1-UP; CPA1-UP; BMB1-UP; PTB1-UP; PTC1-UP; 2TD1-UP; 9WF1-UP; BPJ1-UP; BCK1-UP; CAN1-UP; CBN1-UP; FDN1-UP; 7RN1-UP; 8CN1-UP; 8KN1-UP; 9AN1-UP; PPS1-UP; 1NW1-UP; 2FW1-UP; 2JW1-UP; 3CW1-UP; 4BW1-UP; 8NW1-UP; FDX1-UP; 6HZ1-UP)
G3508 (S/N: 4WD1-UP; 9TG1-UP; CPJ1-UP; CPS1-UP; 9AW1-UP; CPY1-UP)
G3512 (S/N: 4KC1-UP; 5JD1-UP; 7NJ1-UP; CRN1-UP; CSP1-UP; 6JW1-UP)
G3516 (S/N: 3RC1-UP; 8LD1-UP; CPG1-UP; 4EK1-UP; 8PW1-UP; CSZ1-UP)
G3516B (S/N: CSC1-UP; CME1-UP; CEY1-UP; 7EZ1-UP)
G3520 (S/N: 5XW1-UP)
G3524 (S/N: 7SZ1-UP)
G3532 (S/N: 8BZ1-UP)
Power Module:
PM3508 (S/N: BLM1-UP)
PM3512 (S/N: BRF1-UP; BNR1-UP)
PM3516 (S/N: CAC1-UP; BPD1-UP)
PMG3516 (S/N: CFD1-UP)

Description of Change: The new design incorporates a cast steel blank. The steel blank is then machined in order to meet specifications. The casting has surfaces that are not machined. This is an improvement over the previous flywheel that was made from ductile iron and then machined 100 percent.

Adaptable To: The new flywheels that are listed below are a direct replacement for the former flywheels. The former flywheels are cancelled.

Table 1
New Part Number     Former Part Number    
223-0858 Flywheel     2W-8773 Flywheel    
223-0859 Flywheel     1N-3565 Flywheel    
223-1621 Flywheel     174-4630 Flywheel    
226-1759 Flywheel     7E-1719 Flywheel    
226-1760 Flywheel     7C-1923 Flywheel    

Caterpillar Information System:

770 and 772 Off-Highway Truck Chassis Electronic Control System Speed Sensor - Adjust
2002/11/01 New Software Helps Eliminate Erroneous Logging Of Diagnostic Codes {7620}
2003/01/01 New Fuel Injector Groups are Used {1254, 1280}
2003/02/01 Some Of The Tees In Some Breather Groups May Be Damaged By Normal Operation {1317}
3056E Industrial Engine Rocker Shaft - Assemble
797 Off-Highway Truck Braking System Visual Inspection
320D Excavator Daily Inspection
C18 Marine Engines Diagnostic Flash Code Retrieval
120H and 135H Motor Graders Machine Systems Circle Drive - Assemble
120H and 135H Motor Graders Machine Systems Circle Drive - Disassemble
3056E Industrial Engine Rocker Shaft and Pushrod - Install
2003/01/01 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
3054E Industrial Engine Lifter Group - Remove and Install
2002/12/01 The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
3054E Industrial Engine Engine Oil Pump
2003/04/01 Procedure for Tightening the Locknut for the Fan Drive on 3500 Engines {1359}
2003/02/01 New Turbocharger Oil Lines Group is Now Available {1052}
2003/02/01 A New Cylinder Head Gp For G3412 Engines {1101}
2003/04/01 New Water Pumps for 3500 Engines {1361, 1389}
2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
3056E Industrial Engine Camshaft - Remove and Install
2003/03/01 New Cylinder Head Groups and New Prechamber Groups With 1/2-13 Standard Bolts Are Available {1100}
2003/01/01 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/01/06 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.