Speed Sensor - Adjust
Show/hide table
图 1 | g00289497 |
转速传感器 (1) 转速传感器。 (2 ) 锁紧螺母。 (A) 空气间隙。 |
- 拆下转速传感器 (1) 。 在传感器螺纹开口的正中央对正齿轮的一个轮齿。
- 用手在孔中拧入转速传感器 (1) ,使传感器端接触齿轮的轮齿。
- 逆时针方向转动转速传感器 (1) 3/4 圈。 这样会设定空气间隙 (A) 。
- 拧紧锁紧螺母 (2) 至扭矩为 25 ± 5 N·m (18 ± 4 lb ft)。
注: 在拧紧锁紧螺母 (2) 时使转速传感器 (1) 固定不动。
Caterpillar Information System:
2002/11/01 New Software Helps Eliminate Erroneous Logging Of Diagnostic Codes {7620}
2003/01/01 New Fuel Injector Groups are Used {1254, 1280}
2003/02/01 Some Of The Tees In Some Breather Groups May Be Damaged By Normal Operation {1317}
3056E Industrial Engine Rocker Shaft - Assemble
797 Off-Highway Truck Braking System Visual Inspection
320D Excavator Daily Inspection
C18 Marine Engines Diagnostic Flash Code Retrieval
120H and 135H Motor Graders Machine Systems Circle Drive - Assemble
120H and 135H Motor Graders Machine Systems Circle Drive - Disassemble
3056E Industrial Engine Rocker Shaft and Pushrod - Install
2003/01/01 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
3056E Industrial Engine Rocker Shaft and Pushrod - Remove
2003/08/01 New Flywheels Are Used {1156}
3054E Industrial Engine Lifter Group - Remove and Install
2002/12/01 The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
3054E Industrial Engine Engine Oil Pump
2003/04/01 Procedure for Tightening the Locknut for the Fan Drive on 3500 Engines {1359}
2003/02/01 New Turbocharger Oil Lines Group is Now Available {1052}
2003/02/01 A New Cylinder Head Gp For G3412 Engines {1101}
2003/04/01 New Water Pumps for 3500 Engines {1361, 1389}
2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
3056E Industrial Engine Camshaft - Remove and Install
2003/03/01 New Cylinder Head Groups and New Prechamber Groups With 1/2-13 Standard Bolts Are Available {1100}
2003/01/01 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}