Camshaft Bearings - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 8S-2241     | 凸轮轴轴承工具总成     | 1     |
8H-0684 | 棘轮扳手     | 1     |
开始:
- 拆下凸轮轴。 请参阅拆解和组装, "凸轮轴 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 从缸体上拆下凸轮轴轴承 (1) 。
Show/hide table
图 1 | g00546333 |
Show/hide table
图 2 | g00546238 |
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 8S-2241     | 凸轮轴轴承工具总成     | 1     |
8H-0684 | 棘轮扳手     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 将凸轮轴轴承 (1) 安装到缸体的孔中。
注: 将凸轮轴轴承 (1) 的油孔与缸体孔中的油孔对齐。
注: 必须插入凸轮轴轴承,直到轴承的前边缘与缸体凹槽的表面平齐。
Show/hide table
图 3 | g00546238 |
Show/hide table
图 4 | g00546333 |
End By: 安装凸轮轴。 请参阅 拆解和组装, "凸轮轴 - 拆卸和安装"。
Caterpillar Information System:
3056E Industrial Engine Piston Cooling Jets - Remove and Install
3056E Industrial Engine Crankshaft Main Bearings - Remove
3406E and C15 Marine Engines Cooling System - Check - Overheating
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System Pressure - Test
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System - Prime
C9 Marine Generator Set Engines Engine Oil Pressure - Test
3056E Industrial Engine Crankshaft Main Bearings - Install
3056E Industrial Engine Crankshaft - Install
3056E Industrial Engine Crankshaft - Remove
G3406 and G3412 Generator Set Engines Ignition Transformer
C9 Marine Generator Set Engines Inlet Manifold Pressure - Test
C4.4 (Mech) Industrial Engine Cylinder Head - Inspect
C7 and C9 On-Highway Engines 0232-03 5 Volt Supply voltage high (21)
C7 and C9 On-Highway Engines 0232-04 5 Volt Supply voltage low (21)
Test Sequence for Capsule Type Fuel Nozzles{0782} Test Sequence for Capsule Type Fuel Nozzles{0782}
C7 and C9 On-Highway Engines ATA (SAE J1587 / J1708) Data Link Circuit - Test
2002/10/28 Examine Failed Starting Motors to Understand the Reason for Failure {1453}
C7 and C9 On-Highway Engines Check Engine Lamp Circuit - Test
C15 Petroleum Generator Set Engines Electric Starting Motor
C7 On-highway Engine Piston and Rings
3056E Industrial Engine Electric Starting Motor - Remove and Install
3056E Industrial Engine Alternator - Remove
3056E Industrial Engine Alternator - Install
2002/11/01 New Spacer For Marine Oil Pan Gaskets {1302}