Correction to Special Instruction , "Additional Information for the Customer Communication Module (CCM) that Is Used on Series 3500 and 3600 Gas Applications" {1926}
- Electric Power Generation:
- G3520B (S/N: GET1-UP; BGW1-UP; CTK1-UP)
- Engine:
- G3516B (S/N: CEY1-UP; 7EZ1-UP; CTW1-UP)
- G3520C (S/N: GDB1-UP)
- G3606 (S/N: 4ZS281-UP)
- G3608 (S/N: BEN208-UP)
- G3612 (S/N: BKE192-UP)
- G3616 (S/N: BLB163-UP)
In Special Instruction, REHS0806, the Broadcast Event Table that appears in "PID Details for G3500B and G3600A Generator Set Applications" is incorrect. Use the Broadcast Event Table that is shown below.
Show/hide table
Broadcast Event Table $FA $0E ab[ccd ... ccd] Used to broadcast the diagnostics from the ECM. Used only with IID $80.     |
|
(a)     | Cyclic Message number Broadcast ($00 - $FF)     |
(b)     | Status Flag Bit 8 = 0 Always Bit 7: First event Table listing message 1 = First Event table message 0 = Not First Event table message Bit 6: 1 Always Bit 5: Last Message Group Flag 0 - Additional messages will follow 1 - Last message group Bit 4: Buffer Overflow 0 - No Buffer Overflow 1 - Buffer Overflow, Data was incomplete due to limited storage in CCM Bit 3-1: 0 always (reserved)     |
(cc)     | Event Identifier (EID)     |
(d)     | WCI Bit 8-6: Warning Category Indicator Bit 5: Reserved Bit 4-3: Event Type 00 = Not allowed 01 = Maintenance Event 10= Operator/Data Event 11 = Maintenance and Operator/Data Event     |
Caterpillar Information System:
C7 Engines for Combat and Tactical Vehicles 0253-02 Check Customer or System Parameters (56)
3406E, C12, C15 and C18 Marine Engines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3406E, C12, C15 and C18 Marine Engines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B and 3126E On-highway Engines 0252-11 Engine Software Incorrect (59)
793B Off-Highway Truck Suspension Cylinder Suspension Cylinder (Rear)
793B Off-Highway Truck Suspension Cylinder Suspension Cylinder (Front)
G3520C and G3520E Generator Set Engines Engine Monitoring System
3406E, C-10 and C-12 On-highway Engines 0190-00 Engine Overspeed Warning (35)
3406E, C-10 and C-12 On-highway Engines 0122-05 Med/High Retarder current low (14)
3406E, C-10 and C-12 On-highway Engines 0122-06 Med/High Retarder current high (14)
3126B and 3126E On-highway Engines 0043-02 Key Switch Fault (71)
C9 On-highway Engines Fuel System - Prime
3054E Industrial Engine Glow Plugs - Test
3046 Engine for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
3054E Industrial Engine Engine Valve Lash - Inspect/Adjust
584 and 584HD Forwarders S·O·S Information
G3520C and G3520E Engines Camshaft
C9 Marine Generator Set Engines Lubrication System
Procedure to Modify the Engine Harness when Installing the 228-0267 Valve GP - Modulating or the 228-0266 Coil {3139} Procedure to Modify the Engine Harness when Installing the 228-0267 Valve GP - Modulating or the 228-0266 Coil {3139}
3500 Spark Ignited Engines Turbocharger
C9 Marine Generator Set Engines Electronic Unit Injector - Test
3054E Industrial Engine Alternator - Test
C4.4 (Mech) Industrial Engine Fuel Injection Nozzle - Test
C4.4 (Mech) Industrial Engine Engine Oil Cooler - Inspect