Piston Cooling Jet
Show/hide table
 | |
| 图 1 | g00942652 |
(1) 活塞冷却喷嘴
弹簧加载阀必须能够自由移动。 将螺栓拧紧至下述扭矩。 ... 9 N·m (7 lb ft)
活塞冷却喷嘴定位
Show/hide table
 | |
| 图 2 | g01006929 |
(2) 活塞冷却喷嘴 (3) 连杆 (4) 缸体 | |
使用下述步骤检查活塞冷却喷嘴的定位。
- 将杆 (3) 插入活塞冷却喷嘴 (2) 的端部。 杆 (3) 的直径为 1.70 mm (0.067 in)。 杆 (3) 必须高出缸体的顶部。
- 尺寸 (A) 为 55.25 mm (2.1752 in)，尺寸 (B) 为 14 mm (0.5512 in)。 尺寸 (A) 及尺寸 (B) 与气缸孔径 (4) 正切。
- 杆 (3) 的位置必须在尺寸 (C) 范围内。 尺寸 (C) 为 14 mm (0.5512 in)。
Caterpillar Information System:
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor Connections
3406E and C15 Marine Engines Closed Crankcase Ventilation (CCV) System
G3520B Engines Compressor Bypass
2002/08/05 Guidelines for Water Pump Visual Inspection {1361}
C280-16 Petroleum Engine Engine Speed Sensor
3406E and C15 Marine Engines Piston Ring Groove - Inspect
3054E Industrial Engine Cylinder Block
3406E and C15 Marine Engines Water Pump - Test
3406E and C15 Marine Engines Cooling System - Test
C-10, C-12 and C-15 On-highway Engines Multi-Torque - Test
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Timing - Check
3406E and C15 Marine Engines Turbocharger - Inspect
3126E and 3126B Commercial and Truck Engines Product Lifting
C9 Marine Auxiliary and Generator Set Engines Engine Crankcase Breather - Clean
G3600 Engines Exhaust Bypass Valve
EMCPII+ for Gas Engines EMCP Electronic Control (Generator Set)
C9 On-highway Engines Safety Messages
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Water Temperature Regulator - Test
HT400 Pumper Fuel System Primary Filter - Replace
EMCPII+ for Gas Engines Instrument Panel
HT400 Pumper Maintenance Interval Schedule
HT400 Pumper Safety Messages
EMCPII+ for Gas Engines Normal Mode
C-10 and C-12 Truck Engines Wastegate Solenoid