Piston Ring Groove - Inspect
The pistons of the engine have a keystone design ring groove. Refer to the Reuse and Salvage Guidelines for more information on measuring the piston ring groove.
Caterpillar Information System:
3054E Industrial Engine Cylinder Block
3406E and C15 Marine Engines Water Pump - Test
3406E and C15 Marine Engines Cooling System - Test
C-10, C-12 and C-15 On-highway Engines Multi-Torque - Test
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Timing - Check
3406E and C15 Marine Engines Turbocharger - Inspect
C9 Marine Engines Sensors and Electrical Components
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor Initial Operation
3054E Industrial Engine Camshaft
3406E and C15 Marine Engines Finding Top Center Position for No. 1 Piston
3054E Industrial Engine Water Temperature Regulator
3406E and C15 Marine Engines Electrical System
C280-16 Petroleum Engine Engine Speed Sensor
2002/08/05 Guidelines for Water Pump Visual Inspection {1361}
G3520B Engines Compressor Bypass
3406E and C15 Marine Engines Closed Crankcase Ventilation (CCV) System
3606, 3608, 3612, 3616 and 3618 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Panel View Monitor Connections
3054E Industrial Engine Piston Cooling Jet
3126E and 3126B Commercial and Truck Engines Product Lifting
C9 Marine Auxiliary and Generator Set Engines Engine Crankcase Breather - Clean
G3600 Engines Exhaust Bypass Valve
EMCPII+ for Gas Engines EMCP Electronic Control (Generator Set)
C9 On-highway Engines Safety Messages
C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Water Temperature Regulator - Test