PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 180-0041 HORN BRUSH KITS FROM DEALER PARTS STOCK
Usage:
REBE2555-00
Show/hide table
| 25Sep2007 |
U-478
A-391
D-382
O-411
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 180-0041 HORN BRUSH KITS FROM DEALER PARTS STOCK |
|
| 7402 | PI70240 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Dec2007 |
PROBLEM
Show/hide table
| All 180-0041 Horn Brush Kits need to be removed from dealer parts stock. These horn brush kits can wear out faster than desired and should no longer be used. |
ACTION REQUIRED
Show/hide table
| Remove all 180-0041 Kit-Horn Brush from dealer stock. The new service replace by part is a 316-2372 Kit-Horn Brush. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Return all removed parts to service claim room ATTN: Gary Barke. Caterpillar Inc. Attn: Supplier Recovery Service Claims Room 8201 N. University Peoria, IL 61615 |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 224-8926 REAR FUEL LINE ON CERTAIN D9T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 224-8926 REAR FUEL LINE ON CERTAIN D9T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDING OR WOODCHIP ARRANGEMENTS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDING OR WOODCHIP ARRANGEMENTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER BRACKET ASSEMBLY ON CERTAIN 365CL, 365CL FS, AND 365CL MH EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER BRACKET ASSEMBLY ON CERTAIN 365CL, 365CL FS, AND 365CL MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FENDER ASSEMBLIES ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FENDER ASSEMBLIES ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CONDITIONING FAN ASSEMBLIES ON CERTAIN D5N LGP, D5N XL, D6N LGP, AND D6N XL TRACK-TYPE TRACTORS; AND ON CERTAIN 953C, 963C, AND 973C TRACK-TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CONDITIONING FAN ASSEMBLIES ON CERTAIN D5N LGP, D5N XL, D6N LGP, AND D6N XL TRACK-TYPE TRACTORS; AND ON CERTAIN 953C, 963C, AND 973C TRACK-TYPE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE, HOSE, AND DRYER OF THE AIR CONDITIONING LINES GROUP CHARGE ON CERTAIN D6N T3 (XL AND LGP) TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE, HOSE, AND DRYER OF THE AIR CONDITIONING LINES GROUP CHARGE ON CERTAIN D6N T3 (XL AND LGP) TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 1T-2083 TORQUE CONVERTER ON CERTAIN D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 1T-2083 TORQUE CONVERTER ON CERTAIN D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TORQUE CONVERTERS IN CERTAIN D6R SERIES II, D6R XL SERIES II, D6R LGP SERIES II, D6R XW SERIES II, D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TORQUE CONVERTERS IN CERTAIN D6R SERIES II, D6R XL SERIES II, D6R LGP SERIES II, D6R XW SERIES II, D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO SUPPORT THE AIR CONDITIONING TUBES ON CERTAIN 973C TRACK LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO SUPPORT THE AIR CONDITIONING TUBES ON CERTAIN 973C TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS
PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED REAR AXLE PINION SHAFTS IN THE DIFFERENTIAL GEAR GROUP ON CERTAIN 902, 906 AND 908 COMPACT WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED REAR AXLE PINION SHAFTS IN THE DIFFERENTIAL GEAR GROUP ON CERTAIN 902, 906 AND 908 COMPACT WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SECTION OR SPOOL ON CERTAIN 930G SMALL WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SECTION OR SPOOL ON CERTAIN 930G SMALL WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON THE PIPE CONNECTED TO THE BOOM LOWER CHECK VALVE (BLCV) ON CERTAIN 365B, 365B SERIES II, 385B AND 385C PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON THE PIPE CONNECTED TO THE BOOM LOWER CHECK VALVE (BLCV) ON CERTAIN 365B, 365B SERIES II, 385B AND 385C
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, AND TH580B TELEHANDLERS; AND ON CERTAIN CIPI POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, AND TH580B TELEHANDLERS; AND ON CERTAIN CIPI POWER MODULES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SPACER TO PREVENT PUSH ARM PIN INTERFERENCE WITH THE TRACK ON CERTAIN D6G II TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A SPACER TO PREVENT PUSH ARM PIN INTERFERENCE WITH THE TRACK ON CERTAIN D6G II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ARM ASSEMBLY CENTER CASTING ON CERTAIN 963C TRACK LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ARM ASSEMBLY CENTER CASTING ON CERTAIN 963C TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES AND/OR HOSES AND THE FUEL MANIFOLD FOR CERTAIN C27 ENGINE THAT ARE ON D10T TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES AND/OR HOSES AND THE FUEL MANIFOLD FOR CERTAIN C27 ENGINE THAT ARE ON D10T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING CLUTCH AND BRAKE GROUP ON CERTAIN D10T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE STEERING CLUTCH AND BRAKE GROUP ON CERTAIN D10T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND POSSIBLE REPAIR OR REPLACEMENT OF CERTAIN WIRING HARNESSES AND AIR CONDITIONING SWITCH ON CERTAIN 525C, 535C, AND 545C WHEEL-TYPE SKIDDERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND POSSIBLE REPAIR OR REPLACEMENT OF CERTAIN WIRING HARNESSES AND AIR CONDITIONING SWITCH ON CERTAIN 525C, 535C, AND 545C WHEEL-TYPE SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 280-9604 TILT LEVER ON CERTAIN 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 280-9604 TILT LEVER ON CERTAIN 972H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION ON CERTAIN D8T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE TRANSMISSION ON CERTAIN D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CUSHION HITCH DRAIN HOSES AND TUBES ON CERTAIN 631G AND 637G WHEEL TRACTOR-SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CUSHION HITCH DRAIN HOSES AND TUBES ON CERTAIN 631G AND 637G WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDER HEAD ON CERTAIN 938G SERIES II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDER HEAD ON CERTAIN 938G SERIES II WHEEL LOADERS