PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS
Usage:
REBE2459-00
Show/hide table
| 11Sep2007 |
U-444
A-366
D-362
O-391
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS |
|
| 1157 | PS51353 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51353" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2009 |
PROBLEM
Show/hide table
| In certain installations the 1175015/">117-5015 Crankshaft Oil Seal is exposed to excessive amounts of dirt and dust ingress which can lead to excessive wear of the seal and result in seal failure and oil leak. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| *******Group 1******* | |
| 236B | HEN00351-00356, 358-3661, 3700-6371, 6750-6769, 7725-7726, 30643, 40873 |
| 246B | PAT00435, 438-2550, 2553-3313, 3400-5522 |
| 248B | SCL00233, 235-236, 238-1286, 1350-2044 |
| 252B | SCP00315-03258, 3260-3306, 3308-3321, 3323-3327, 3329-4315, 4600-4614, 5025 |
| 262B | PDT00239, 265-2896, 3000-4640, 4643-4910, 82635 |
| 267B | CYC00170-00290, 400-1482 |
| 268B | LBA00292-01198, 1300-1675, 1677-2089 |
| 277B | MDH00258, 265, 277, 293, 297, 299-303, 308-930, 1600-3429, 3550-5379 |
| 287B | ZSA00348-00831, 1000-2652, 2700-4639 |
| 906 | MER00105-02493, 2495-2658 |
| 908 | TAR00104-01491 |
Show/hide table
| *******Group 2******* | |
| 3044 | 34400119-00120, 122-124, 126-130, 494-499, 509-510, 526-1674, 1676-1729, 1731-2093, 2095-2274, 2278-2973, 2992-3195, 3199-3435, 3437-3541, 3544-4104, 4138-4182, 4216-4227, 4237-4311, 4345-4467, 4469-4519, 4529-4576, 8790, 9147, 10703 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| *******Group 1******* | ||
| 1 | 5I7628 | GASKET |
| 1 | 5I8056 | PLUG |
| 1 | 1175015 | SEAL AS-OIL |
| *******Group 2******* | ||
| 1 | 5I7628 | GASKET |
| 1 | 5I8056 | PLUG |
| 1 | 1175015 | SEAL AS-OIL |
ACTION REQUIRED
Show/hide table
| After failure, replace the failed 1175015/">117-5015 crankshaft oil seal assembly with new seal assembly. Additionally, to reduce potential further dust ingress, it is required that the flywheel housing is examined and cleaned (internal and external) prior to ensuring plug and gasket is fitted as per Image1. If plug is not fitted it is required that the aperture is tapped to accommodate M16X1.5 thread and fit new 5I-8056 - plug and 5I-7628 - gasket as per Image1. |
Show/hide table
|
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| *******Group 1******* | ||||||
0-24 mo |
||||||
| NOTE: This is a 10.0-hour job for Group 1 | ||||||
Show/hide table
| *******Group 2******* | ||||||
0-24 mo |
||||||
| NOTE: This is a 10.0-hour job for Group 2 | ||||||
PARTS DISPOSITION
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED REAR AXLE PINION SHAFTS IN THE DIFFERENTIAL GEAR GROUP ON CERTAIN 902, 906 AND 908 COMPACT WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED REAR AXLE PINION SHAFTS IN THE DIFFERENTIAL GEAR GROUP ON CERTAIN 902, 906 AND 908 COMPACT WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BATTERY CABLE ROUTING ON CERTAIN 980H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BATTERY CABLE ROUTING ON CERTAIN 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SPINDLE BOLT TORQUE ON CERTAIN 615C-II WHEEL TRACTOR-SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SPINDLE BOLT TORQUE ON CERTAIN 615C-II WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED EXHAUST ELBOW ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED EXHAUST ELBOW ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM TO INSTALL A NEW CHECK VALVE (RIDE CONTROL) ON CERTAIN 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM TO INSTALL A NEW CHECK VALVE (RIDE CONTROL) ON CERTAIN 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONDENSER COIL ON CERTAIN 924G, 928G AND 930G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONDENSER COIL ON CERTAIN 924G, 928G AND 930G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN ADAPTER ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN ADAPTER ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CYLINDER RODS ON CERTAIN 992G WHEEL LOADERS AND THE LIFT CYLINDER RODS ON CERTAIN 994F WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CYLINDER RODS ON CERTAIN 992G WHEEL LOADERS AND THE LIFT CYLINDER RODS ON CERTAIN 994F WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING PUMP TUBE ON CERTAIN 365B, 365B SERIES II, 365C, 385B, 385C AND 5090B EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING PUMP TUBE ON CERTAIN 365B, 365B SERIES II, 365C, 385B, 385C AND 5090B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBO OIL SUPPLY LINES ON CERTAIN 824/825/826 COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBO OIL SUPPLY LINES ON CERTAIN 824/825/826 COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING OR UPDATING THE 240-9478 REAR HOOD ASSEMBLY ON CERTAIN 631G AND 637G WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING OR UPDATING THE 240-9478 REAR HOOD ASSEMBLY ON CERTAIN 631G AND 637G WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, 3516, AND 3524 MACHINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, 3516, AND 3524 MACHINE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO SUPPORT THE AIR CONDITIONING TUBES ON CERTAIN 973C TRACK LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO SUPPORT THE AIR CONDITIONING TUBES ON CERTAIN 973C TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TORQUE CONVERTERS IN CERTAIN D6R SERIES II, D6R XL SERIES II, D6R LGP SERIES II, D6R XW SERIES II, D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TORQUE CONVERTERS IN CERTAIN D6R SERIES II, D6R XL SERIES II, D6R LGP SERIES II, D6R XW SERIES II, D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 1T-2083 TORQUE CONVERTER ON CERTAIN D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 1T-2083 TORQUE CONVERTER ON CERTAIN D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE, HOSE, AND DRYER OF THE AIR CONDITIONING LINES GROUP CHARGE ON CERTAIN D6N T3 (XL AND LGP) TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE, HOSE, AND DRYER OF THE AIR CONDITIONING LINES GROUP CHARGE ON CERTAIN D6N T3 (XL AND LGP) TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CONDITIONING FAN ASSEMBLIES ON CERTAIN D5N LGP, D5N XL, D6N LGP, AND D6N XL TRACK-TYPE TRACTORS; AND ON CERTAIN 953C, 963C, AND 973C TRACK-TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CONDITIONING FAN ASSEMBLIES ON CERTAIN D5N LGP, D5N XL, D6N LGP, AND D6N XL TRACK-TYPE TRACTORS; AND ON CERTAIN 953C, 963C, AND 973C TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FENDER ASSEMBLIES ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FENDER ASSEMBLIES ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER BRACKET ASSEMBLY ON CERTAIN 365CL, 365CL FS, AND 365CL MH EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER BRACKET ASSEMBLY ON CERTAIN 365CL, 365CL FS, AND 365CL MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDING OR WOODCHIP ARRANGEMENTS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDING OR WOODCHIP ARRANGEMENTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 224-8926 REAR FUEL LINE ON CERTAIN D9T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 224-8926 REAR FUEL LINE ON CERTAIN D9T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 180-0041 HORN BRUSH KITS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 180-0041 HORN BRUSH KITS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SECTION OR SPOOL ON CERTAIN 930G SMALL WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SECTION OR SPOOL ON CERTAIN 930G SMALL WHEEL LOADERS