PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CONDITIONING FAN ASSEMBLIES ON CERTAIN D5N LGP, D5N XL, D6N LGP, AND D6N XL TRACK-TYPE TRACTORS; AND ON CERTAIN 953C, 963C, AND 973C TRACK-TYPE LOADERS
Usage:
REBE2503-00
Show/hide table
| 02Oct2007 |
U-499
A-410
D-401
O-432
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR CONDITIONING FAN ASSEMBLIES ON CERTAIN D5N LGP, D5N XL, D6N LGP, AND D6N XL TRACK-TYPE TRACTORS; AND ON CERTAIN 953C, 963C, AND 973C TRACK-TYPE LOADERS |
|
| 7320 | PS51365 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51365" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2009 |
PROBLEM
Show/hide table
| Dust may entering through the hub area of the fan and mixing with moisture to form mud on certain D5N LGP, D5N XL, D6N LGP, and D6N XL Track-Type Tractors; and on certain 953C, 963C, and 973C Track-Type Loaders. When the mud dries, the motor is not allowed to rotate freely which can cause a failure. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 953C | BBX01393-01582, 2000-2360, 2362-2370, 2372-2375, 2377-3113 |
| 963C | BBD01462-01611, 2000-2034, 2036-2041, 2044, 2047-2063, 2066, 2069-2070, 2072-2082, 2084-2134, 2137-2140, 2143-2184, 2187-2197, 2199-2201, 2203, 2208, 2219-2244, 2246-2270, 2273-2288, 2291-2342, 2346, 2348-2359, 2361-3080, 3082 |
| 973C | BCP00205-00312 LDX00195-00311 |
| D5N LGP | AKD01307-01750, 1752-2212 CKT00305-00309, 400-444 |
| D5N XL | AGG00848, 1591-2854 CFH00164-00166, 300-345 |
| D6N LGP | ALR00661-00800 ALY01566-03011, 3013-3251 CCG00257-00261, 400-430 CCS00400-00411 DJY00121-00125 |
| D6N XL | AKM00861, 1415-2529 ALH00753-00897 CBF00300-00347 CBJ00404-00520 CBL00400-00405 CCK00315, 340, 351, 359-360, 372, 375, 530-846 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 2 | 3043715 | FAN AS. |
ACTION REQUIRED
Show/hide table
| When one of the current two fans fail, both fans should be removed and replaced with new 304-3715 Fans. Refer to the attached Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
25-48 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
| Refer to the Service Manual as necessary. NOTE: Illustrations and procedure are for Medium Track Type Tractor applications. Track Loaders are similar. 1. Remove the fuses for condenser fan to prevent accidental operation during removal and installation. 2. Remove the 5 M10 bolts and washers from cover assembly and remove the cover exposing the 2 condenser fans. |
|
| Image1.1.1 |
| 3. Remove the M8 bolts and washers from the condenser fans. 4. Remove both of the existing condenser fans from assembly by disconnecting harness connections. |
|
| Image1.2.1 |
| 5. Install the two new condenser fans. 6. Re-connect the harness connections, and install the M8 bolts and washers. 7. Re-assemble the cover assembly. 8. Re-assemble the M10 bolts and washers for the cover assembly. 9. Replace the fuses. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE, HOSE, AND DRYER OF THE AIR CONDITIONING LINES GROUP CHARGE ON CERTAIN D6N T3 (XL AND LGP) TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TUBE, HOSE, AND DRYER OF THE AIR CONDITIONING LINES GROUP CHARGE ON CERTAIN D6N T3 (XL AND LGP) TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 1T-2083 TORQUE CONVERTER ON CERTAIN D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 1T-2083 TORQUE CONVERTER ON CERTAIN D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TORQUE CONVERTERS IN CERTAIN D6R SERIES II, D6R XL SERIES II, D6R LGP SERIES II, D6R XW SERIES II, D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TORQUE CONVERTERS IN CERTAIN D6R SERIES II, D6R XL SERIES II, D6R LGP SERIES II, D6R XW SERIES II, D7R SERIES II, D7R XR SERIES II, AND D7R LGP SERIES II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO SUPPORT THE AIR CONDITIONING TUBES ON CERTAIN 973C TRACK LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A BRACKET TO SUPPORT THE AIR CONDITIONING TUBES ON CERTAIN 973C TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT OIL SEAL ASSEMBLY ON CERTAIN 3044 ENGINE INSTALLATIONS
PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED REAR AXLE PINION SHAFTS IN THE DIFFERENTIAL GEAR GROUP ON CERTAIN 902, 906 AND 908 COMPACT WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED REAR AXLE PINION SHAFTS IN THE DIFFERENTIAL GEAR GROUP ON CERTAIN 902, 906 AND 908 COMPACT WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BATTERY CABLE ROUTING ON CERTAIN 980H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BATTERY CABLE ROUTING ON CERTAIN 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SPINDLE BOLT TORQUE ON CERTAIN 615C-II WHEEL TRACTOR-SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SPINDLE BOLT TORQUE ON CERTAIN 615C-II WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED EXHAUST ELBOW ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED EXHAUST ELBOW ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM TO INSTALL A NEW CHECK VALVE (RIDE CONTROL) ON CERTAIN 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM TO INSTALL A NEW CHECK VALVE (RIDE CONTROL) ON CERTAIN 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONDENSER COIL ON CERTAIN 924G, 928G AND 930G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONDENSER COIL ON CERTAIN 924G, 928G AND 930G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN ADAPTER ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN ADAPTER ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FENDER ASSEMBLIES ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FENDER ASSEMBLIES ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER BRACKET ASSEMBLY ON CERTAIN 365CL, 365CL FS, AND 365CL MH EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER BRACKET ASSEMBLY ON CERTAIN 365CL, 365CL FS, AND 365CL MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDING OR WOODCHIP ARRANGEMENTS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDING OR WOODCHIP ARRANGEMENTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 224-8926 REAR FUEL LINE ON CERTAIN D9T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 224-8926 REAR FUEL LINE ON CERTAIN D9T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 180-0041 HORN BRUSH KITS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 180-0041 HORN BRUSH KITS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SECTION OR SPOOL ON CERTAIN 930G SMALL WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SECTION OR SPOOL ON CERTAIN 930G SMALL WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON THE PIPE CONNECTED TO THE BOOM LOWER CHECK VALVE (BLCV) ON CERTAIN 365B, 365B SERIES II, 385B AND 385C PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON THE PIPE CONNECTED TO THE BOOM LOWER CHECK VALVE (BLCV) ON CERTAIN 365B, 365B SERIES II, 385B AND 385C
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, AND TH580B TELEHANDLERS; AND ON CERTAIN CIPI POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, AND TH580B TELEHANDLERS; AND ON CERTAIN CIPI POWER MODULES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SPACER TO PREVENT PUSH ARM PIN INTERFERENCE WITH THE TRACK ON CERTAIN D6G II TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A SPACER TO PREVENT PUSH ARM PIN INTERFERENCE WITH THE TRACK ON CERTAIN D6G II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ARM ASSEMBLY CENTER CASTING ON CERTAIN 963C TRACK LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ARM ASSEMBLY CENTER CASTING ON CERTAIN 963C TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES AND/OR HOSES AND THE FUEL MANIFOLD FOR CERTAIN C27 ENGINE THAT ARE ON D10T TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES AND/OR HOSES AND THE FUEL MANIFOLD FOR CERTAIN C27 ENGINE THAT ARE ON D10T TRACK-TYPE TRACTORS