Muffler - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite MR2000 | - |
- Remove bolts (1) and (3).
- Remove bolts (2).
- Loosen clamp (4).
Show/hide table
Illustration 2 g06208970 - Attach a suitable lifting device to muffler assembly (5). The weight of muffler assembly (5) is approximately
47 kg (104 lb) . - Remove muffler assembly (5).
- Discard clamp (4).
Show/hide table
Illustration 3 g03317518 - Loosen clamp (7) and remove pipe (6).
- Loosen U-bolts (8) and (9).
- Remove bracket assembly (10) from muffler (11).
Show/hide table
Illustration 1 | g03317498 |
- Install muffler (11) in the reverse order of removal.
- Tighten the upper nuts for U-bolts (8) and (9) to a torque of
35 ± 7 N·m (26 ± 5 lb ft) . - Tighten the lower nuts for U-bolts (8) and (9) to a torque of
15 ± 3 N·m (133 ± 27 lb in) .Note: Align clamp (7) with the edge of pipe (6).
- Tighten clamp (7) to a torque of
63 ± 5 N·m (46 ± 4 lb ft) . - Apply a thin coat of Tooling (A) to the joint at clamp (4).
- Tighten the bolts of clamp (4) evenly to a torque of
68 ± 12 N·m (50 ± 9 lb ft) .
- Tighten the upper nuts for U-bolts (8) and (9) to a torque of
Caterpillar Information System:
A New Warning Film Is Now Available for the Material Handling Arms {6542, 7405} A New Warning Film Is Now Available for the Material Handling Arms {6542, 7405}
336 and 336 GC Excavator Equipment Lowering with Engine Stopped
340 Excavator Engine and Machine Warm-Up
PM820, PM822, and PM825 Cold Planer Machine Systems Flow Control Valve - Remove and Install - Front
320E, 323F and 336F XE Excavators Supplement for Cat Grade Control with Assist Electronic Control (Machine System)
Next Generation Hydraulic Excavator Monitoring System General Information
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Motor (Auxiliary) - Remove and Install
Control Lever Assembly May Break in the Main Hydraulic Pump Group on Certain 374F Excavators and Mobile Hydraulic Power Units {5070} Control Lever Assembly May Break in the Main Hydraulic Pump Group on Certain 374F Excavators and Mobile Hydraulic Power Units {5070}
336 and 336 GC Excavator Fuel Tank Shutoff and Drain Control
New Gussets in the Undercarriage Are Now Available for Certain Forestry Excavators Equipped with A Grapple Saw {4151} New Gussets in the Undercarriage Are Now Available for Certain Forestry Excavators Equipped with A Grapple Saw {4151}
320D2 FM Forestry Machine Engine Supplement Air Cleaner - Remove and Install
320D2 FM Forestry Machine Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
Procedure to Troubleshoot the Transmission Speed Sensor on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {3030} Procedure to Troubleshoot the Transmission Speed Sensor on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {3030}
320D2 FM Forestry Machine Engine Supplement Turbocharger - Remove and Install
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Features
Installation of the 494-9529 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 494-9529 Front Lines Gp on Certain Hydraulic Excavators {5057}
G315B and G320B Waste Handling Grapple Mounting Bracket - Remove and Install
G315B and G320B Waste Handling Grapple Hydraulic Cylinder - Remove and Install
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Disassemble
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Assemble
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Navigation
S2050, S3050, S2070, S3070, S2090 and S3090 Shears General Information - Rotating Shear
A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493} A Ground Wiring Addition Is Now Used for the ARD Nozzle Heater Relay on Certain C9.3 through C18 Tier 4 Machine Engines {1050, 108D, 1422, 4493}
Bluetooth Operator ID and Machine Security System (MSS) General Information