Flow Control Valve - Remove and Install - Front
- Install service lock (1). Lower the machine onto service lock (1).
- Release the system pressure.
Show/hide table
Illustration 2 g06232964 - Remove bolts (1) and cover (2).
Show/hide table
Illustration 3 g06233092 - Disconnect hose assemblies (3) and the O-ring seals. Position out of the way. Disconnect tube assembly (4) and position out of the way.
- Disconnect harness assembly (5) and position out of the way.
Show/hide table
Illustration 4 g06233095 - Remove bolts (6) and remove flow control valve (7). Repeat for the other side.
Show/hide table
| |
| Illustration 1 | g06261712 |
- Install flow control valve (7) in the reverse order of removal.
Caterpillar Information System:
320E, 323F and 336F XE Excavators Supplement for Cat Grade Control with Assist Electronic Control (Machine System)
Next Generation Hydraulic Excavator Monitoring System General Information
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Motor (Auxiliary) - Remove and Install
Control Lever Assembly May Break in the Main Hydraulic Pump Group on Certain 374F Excavators and Mobile Hydraulic Power Units {5070} Control Lever Assembly May Break in the Main Hydraulic Pump Group on Certain 374F Excavators and Mobile Hydraulic Power Units {5070}
336 and 336 GC Excavator Fuel Tank Shutoff and Drain Control
New Gussets in the Undercarriage Are Now Available for Certain Forestry Excavators Equipped with A Grapple Saw {4151} New Gussets in the Undercarriage Are Now Available for Certain Forestry Excavators Equipped with A Grapple Saw {4151}
320D2 FM Forestry Machine Engine Supplement Air Cleaner - Remove and Install
320D2 FM Forestry Machine Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Bucket Linkage - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Bucket - Remove and Install
304.5E2 XTC Mini Hydraulic Excavators Machine Systems Arm and Bearing - Remove and Install - XTC
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Hood Lift) - Remove and Install
340 Excavator Engine and Machine Warm-Up
336 and 336 GC Excavator Equipment Lowering with Engine Stopped
A New Warning Film Is Now Available for the Material Handling Arms {6542, 7405} A New Warning Film Is Now Available for the Material Handling Arms {6542, 7405}
320D2 FM Forestry Machine Engine Supplement Muffler - Remove and Install
Procedure to Troubleshoot the Transmission Speed Sensor on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {3030} Procedure to Troubleshoot the Transmission Speed Sensor on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {3030}
320D2 FM Forestry Machine Engine Supplement Turbocharger - Remove and Install
730, 730 Ejector, 735, 740 Ejector, and 745 Articulated Trucks Information Display Display Features
Installation of the 494-9529 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 494-9529 Front Lines Gp on Certain Hydraulic Excavators {5057}
G315B and G320B Waste Handling Grapple Mounting Bracket - Remove and Install
G315B and G320B Waste Handling Grapple Hydraulic Cylinder - Remove and Install
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Disassemble
G315B and G320B Waste Handling Grapple Grapple Housing and Shell Gp - Assemble