Caterpillar Industrial Products, Inc.
Caterpillar Industrial Products, Inc. (CIPI) provides track roller frames of various styles to the Original Equipment Manufacturer (OEM) which include these arrangements: oscillating undercarriages for blast hole drill machines, bolt-on carbody designs for forestry products and special-length frames for underground mining products.
Because of the availability of a wide variety of frame arrangements, creating an Owner's Manual that is all inclusive of the available options is difficult. With the exception of the track roller frames, most of the excavator lowers use moving undercarriage components from Caterpillar. These components include rollers, idlers, track groups, and final drives with motors and sprockets.
This Owner's Manual provides information for the Caterpillar component's in your excavator lower in the following manuals:
- Operation and Maintenance
- Specifications
- Systems Operation
- Testing and Adjusting
- Disassembly and Assembly
- Parts
Please read the information and understand the procedures before you begin working on the excavator lower. If the procedure is not fully understood, contact your dealer.
If your excavator lower utilizes non-Caterpillar components, refer to the supplemental information which is provided for those components.
Locations of the Identification Plates on the Undercarriage
Type 1
Illustration 1 | g00846654 |
Typical right side view of the undercarriage arrangement (1) Carrier roller mounting bracket (2) Part number (3) Change level (4) Facility identification (5) Sequential number (6) Side identification |
Type 2
Illustration 2 | g00846574 |
Typical right side view of the undercarriage arrangement (7) Bulkhead plate (8) Area that is designated for the identification plate |