3408E and 3412E Industrial Engines Caterpillar


Water Temperature Indicator

Usage:

3412E 4CR



Illustration 1g00804092

Table 1
CALIBRATION CHART    
Pointer Position (°C)     Test Temperature    
(1)    
43 to 40 °C (109 to 104 °F)    
B    
101 to 99 °C (214 to 210 °F)    
(2)    
121 to 109 °C (250 to 228 °F)    
( 1 ) The pointer must not move beyond the end of the indicator band.
( 2 ) The pointer must stop between 0 and -2.20 mm (-0.087 inch) of point (C) .

Caterpillar Information System:

3054 and 3056 Engines 550 Generator Set Control Panel Symbols
3054 and 3056 Engines 550 Generator Set Control Panel Input/Output Expansion
3054 and 3056 Engines 550 Generator Set Control Panel Keys
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Firmware - Update
3056E Industrial Engine Engine Valve Lash - Inspect/Adjust
C12 Marine Engine Lubrication System
3408E and 3412E Industrial Engines Maintenance Interval Schedule - 3412E Industrial Engine
3408E and 3412E Industrial Engines Maintenance Interval Schedule - 3408E Industrial Engine
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Firmware Compatibility
CIPI UNDERCARRIAGE Arrangements: 9Q-5262, 191-4041, and 204-9207 Final Drive - Install
3054 and 3056 Engines 550 Generator Set Control Panel Indicators
3126E and 3126B Commercial and Truck Engines Fuel Inlet Screen - Clean/Inspect/Replace - If Equipped
C12 Marine Engines Model View Illustrations
3126E and 3126B Commercial and Truck Engines Customer Specified Parameters
3408E and 3412E Industrial Engines Stopping the Engine
CIPI UNDERCARRIAGE Arrangements: 9Q-5195, 9Q-5197, 9Q-5198, 9Q-5232, 9Q-5504, 9Q-5643, 9Q-5651, 9Q-5727, 9Q-5728, 9Q-5729, 9Q-5730, 9Q-5731, 9Q-5747, 9Q-5876, 180-4029, and 213-3892 Part Number Location
3408E and 3412E Industrial Engines Gauges and Indicators
3054 and 3056 Engines 550 Generator Set Control Panel Service Tools
3408E and 3412E Industrial Engines Air Starting System
3126E and 3126B Commercial and Truck Engines Starting the Engine
3408E and 3412E Industrial Engines Electrical System
3054 and 3056 Marine Generator Set Engines Turbocharger - Remove - 3056 Engine
3500B Locomotive Engines Diagnostic Codes
3054 and 3056 Marine Generator Set Engines Exhaust Manifold - Remove and Install - 3056 Engine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.