Illustration 1 | g00849140 |
550 Control Module (1) Display Area (2) UP Key (3) Programmable Indicators (4) DOWN Key (5) Indicator for Alarm (6) Indicator for the configuration mode (7) Indicator for the information mode (8) Indicator for the alarm mode (9) Indicator for the engine status mode (10) Indicator for the generator status mode (11) Indicator for the event log mode (12) Mode Select Key (13) Stop/Reset Key (14) Start Key (15) Manual Mode Key (16) Automatic Mode Key (17) Lamp Test Key |
INDICATOR FOR THE ALARM MODE (8) - An alarm condition has been detected. A warning is shown by a steady indicator. A shutdown is shown by a flashing indicator.
INDICATOR FOR THE ENGINE STATUS MODE (9) - The engine status mode contains the instruments page for the details of the engine. The details include oil pressure, and engine temperature.
INDICATOR FOR THE GENERATOR STATUS MODE (10) - The generator status mode contains the instruments page for the details of the generator. The details include frequency and voltage.
INDICATOR FOR THE EVENT LOG MODE (11) - Details recorded history of generator operation.
STOP/RESET KEY (13) - Stop the engine and reset any alarm conditions.
START KEY (14) - Start the engine, if the controls are in the appropriate mode.
MANUAL MODE KEY (15) - The control module will start the engine when the control module is given a remote start command.
AUTOMATIC MODE KEY (16) - The control module will start the engine automatically when the control module is given a remote start command.
LAMP TEST KEY (17) - All of the indicators will illuminate in order to test for correct operation.