3116 Truck Engine Caterpillar


Piston Ring Groove - Inspect

Usage:

3116 2BK
The pistons of the engine have a keystone design ring groove. The piston rings are a keystone ring. The 3116 Engine requires the 4C-8164 Piston Ring Groove Gauge in order to check the top ring groove in the piston. Refer to the instruction card for correct use of the 4C-8164 Piston Ring Groove Gauge .

Refer to Guideline For Reusable Parts And Salvage Operations, SEBF8049, "Pistons" for more information.

Caterpillar Information System:

SCT673 Truck Mounted PumperPOD Hydraulic Oil Sample - Obtain - Gear Case
3054 and 3056 Marine Generator Set Engines Exhaust Manifold
3054 and 3056 Engines 520 Generator Set Control Panel Connector Contact Description
3116 Truck Engine Engine Oil Pressure - Test
3116 Truck Engine Engine Valve Lash - Inspect/Adjust
3116 Truck Engine Air Inlet and Exhaust System - Inspect
3054 and 3056 Engines 520 Generator Set Control Panel Troubleshooting
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Initial Startup Procedure
2002/03/01 Understanding The "Engine Load" Display That Is A Part Of The Engine Supervisory System (ESS) {1900}
3116 Truck Engine Gear Group (Front) - Time
3116 Truck Engine Fuel System - Inspect
3024C Engine for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
3512B and 3512C Engines For Caterpillar Built Machines Heating System
3116 Truck Engine Charging System - Test
385B Excavator Disconnecting Hydraulic Hoses and Lines
3054 and 3056 Engines 520 Generator Set Control Panel Wiring Diagrams
3126B and 3126E On-highway Engines 0096-03 Fuel Level voltage high
3054 and 3056 Engines 520 Generator Set Control Panel Factory Default Values of Configuration Parameters
G3408 and G3412 Engines Engine Speed/Timing Sensor - Clean/Inspect
Power Module Switchgear (Low Voltage and Medium Voltage) Receiving Inspection
Power Module Switchgear (Low Voltage and Medium Voltage) Storage
Power Module Switchgear (Low Voltage and Medium Voltage) Handling
3126B and 3126E On-highway Engines 0096-04 Fuel Level voltage low
Power Module Switchgear (Low Voltage and Medium Voltage) Installation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.