Gas Engine Ignition
Show/hide table
图 1 | g01274271 |
(1) 变压器组件
(2) 密封件
用发动机机油轻轻地润滑孔。
(3) 扩展组件
(4) 火花塞
- 按照以下扭矩将火花塞拧紧到缸盖。 ... 68 ± 4 N·m (50 ± 3 lb ft)
- 火花塞间隙 ... 0.29 ± 0.04 mm (0.011 ± 0.002 in)
注: 安装火花塞时,使用新密封垫。 安装火花塞垫片,让舌片朝向火花塞的密封面。
将接头螺母顺时针拧到变压器。 使用 6V-0006 电动接头钳 拧紧螺母。
Caterpillar Information System:
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Lines
2001/09/01 Repair Procedure for the Threads in a Cylinder Head Casting that were Damaged by a Manual Valve Group (Kiene Valve) {1100}
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine Starting with Jump Start Cables
Electronic Modular Control Panel II (EMCP II) Fault Description
2001/08/01 A Special Instruction Is Available For Replacing Starting Motor Solenoids {1467}
SPS342 Skid Mounted Pumper Maintenance Interval Schedule
2001/11/01 A New Temperature Indicator Assembly Is Available To Measure The Temperature Of The Air In The Air Inlet Manifold {1058, 7450}
SBF214 and SUF557 Skid Mounted Power Packs Maintenance Interval Schedule
3512B Marine Auxiliary Engine Vibration Sensor
3126B Marine Engines Diagnostic Codes
3408E and 3412E Industrial Engines Throttle Position Sensor - Calibrate
G3600 Engines Ignition System
G3406 Engine Ignition System
G3406 Engine Ignition System
G3406 Engine Ignition Transformer
3046 Engine for Caterpillar Built Machines Valve Guide - Inspect
Automatic Transfer Switches CTS, CTSD Series General Information
G3406 Engine Governor
2007/04/30 Maintenance Recommendations for the Crankshaft Vibration Dampers {1205}
G3408C and G3412C Engines Air/Fuel Ratio Control - Oxygen Feedback
G3406 Engine Gas Pressure Regulator
2001/09/01 A New Hose Assembly That Is Made From Stainless Steel Is Used In The Turbocharger Cleaner Groups {1052}
Electronic Modular Control Panel II (EMCP II) Electrical Converter (Pulse Width Modulated)
G3406 Engine Electronic Control System Operation