Water Temperature Regulator - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the coolant from the cooling system to a level below the water pump.
Show/hide table
Illustration 1 | g00791914 |
- Remove water line (1) from the water temperature regulator housing.
- Remove water temperature regulator housing (2) .
Show/hide table
Illustration 2 | g00791916 |
- Remove lip seal (3) from the regulator housing if a replacement is necessary.
Show/hide table
Illustration 3 | g00791921 |
- Remove water temperature regulator (4) .
Show/hide table
Illustration 4 | g00791923 |
Caterpillar Information System:
2001/04/16 Correction to Operation and Maintenance Manual, SEBU7275-01, "Maintenance Interval Schedule" {7500}
3412C Engine Connecting Rod
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
G3408C and G3412C Engines Turbocharger - Assemble
Product Identification Numbers (PIN) Location Guide Excavator (Track)
SPS342 Skid Mounted Pumper Model View Illustrations
G3408C and G3412C Engines Turbocharger - Disassemble
G3500 Generator Sets Refill Capacities
3412C Engine Pistons and Connecting Rods - Assemble
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
3500B Engines Turbocharger
3412E, C30 and C32 Marine Engines Camshaft - Install
G3408C and G3412C Engines Water Temperature Regulator - Install
3412C Engine Connecting Rod Bearings - Install
G3408C and G3412C Engines Engine Oil Pan - Remove
G3408C and G3412C Engines Engine Oil Pan - Install
G3408C and G3412C Engines Water Pump - Remove
SPS342 Skid Mounted Pumper Product Description
G3408C and G3412C Engines Water Pump - Install
3126B Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3408C and G3412C Engines Auxiliary Water Pump - Remove
3412C Engine Fuel Filter Base - Install
G3408C and G3412C Engines Auxiliary Water Pump - Install
3412C Engine Fuel Filter Base - Remove