Water Pump - Remove
Removal Procedure
Start By:
- Remove the vibration damper. Refer to Disassembly and Assembly, "Vibration Damper - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the coolant from the engine into a suitable container for storage or disposal.
- Remove water elbow (1) .
Show/hide table
Illustration 1 | g00791971 |
- Remove bolts (2) in order to remove water pump cover (3) and the O-ring seal.
Show/hide table
Illustration 2 | g00791973 |
- Remove bolts (4) and remove elbow (6) .
Show/hide table
Illustration 3 | g00791977 |
- Remove water pump (5) and the gasket.
Caterpillar Information System:
G3408C and G3412C Engines Engine Oil Pan - Install
G3408C and G3412C Engines Engine Oil Pan - Remove
3412C Engine Connecting Rod Bearings - Install
G3408C and G3412C Engines Water Temperature Regulator - Install
G3408C and G3412C Engines Water Temperature Regulator - Remove
2001/04/16 Correction to Operation and Maintenance Manual, SEBU7275-01, "Maintenance Interval Schedule" {7500}
3412C Engine Connecting Rod
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
G3408C and G3412C Engines Turbocharger - Assemble
Product Identification Numbers (PIN) Location Guide Excavator (Track)
SPS342 Skid Mounted Pumper Model View Illustrations
G3408C and G3412C Engines Turbocharger - Disassemble
SPS342 Skid Mounted Pumper Product Description
G3408C and G3412C Engines Water Pump - Install
3126B Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3408C and G3412C Engines Auxiliary Water Pump - Remove
3412C Engine Fuel Filter Base - Install
G3408C and G3412C Engines Auxiliary Water Pump - Install
3412C Engine Fuel Filter Base - Remove
G3408C and G3412C Engines Auxiliary Water Pump - Disassemble
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
3412C Engine Crankshaft Main Bearings - Install
G3408C and G3412C Engines Auxiliary Water Pump - Assemble
G3408C and G3412C Engines Engine Oil Pump - Remove