Engine Oil Pan - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put new gasket (4) into position on engine oil pan (3) .
Show/hide table
Illustration 1 | g00552333 |
Typical example |
- Use two technicians in order to put engine oil pan (3) in position on the engine. The weight of the engine oil pan is approximately 27 kg (60 lb).
- Install bolts (2) that hold engine oil pan (3) to cylinder block.
- Fill the engine to the correct level with the recommended oil. Refer to the Operation and Maintenance Manual.
Caterpillar Information System:
G3408C and G3412C Engines Engine Oil Pan - Remove
3412C Engine Connecting Rod Bearings - Install
G3408C and G3412C Engines Water Temperature Regulator - Install
G3408C and G3412C Engines Water Temperature Regulator - Remove
2001/04/16 Correction to Operation and Maintenance Manual, SEBU7275-01, "Maintenance Interval Schedule" {7500}
3412C Engine Connecting Rod
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
G3408C and G3412C Engines Turbocharger - Assemble
Product Identification Numbers (PIN) Location Guide Excavator (Track)
SPS342 Skid Mounted Pumper Model View Illustrations
G3408C and G3412C Engines Turbocharger - Disassemble
G3500 Generator Sets Refill Capacities
G3408C and G3412C Engines Water Pump - Remove
SPS342 Skid Mounted Pumper Product Description
G3408C and G3412C Engines Water Pump - Install
3126B Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3408C and G3412C Engines Auxiliary Water Pump - Remove
3412C Engine Fuel Filter Base - Install
G3408C and G3412C Engines Auxiliary Water Pump - Install
3412C Engine Fuel Filter Base - Remove
G3408C and G3412C Engines Auxiliary Water Pump - Disassemble
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
3412C Engine Crankshaft Main Bearings - Install
G3408C and G3412C Engines Auxiliary Water Pump - Assemble