Water Temperature Regulator - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install water temperature regulator (4) .
Show/hide table
 | |
| Illustration 1 | g00791923 |
- Install lip seal (3) to the regulator housing.
Show/hide table
 | |
| Illustration 2 | g00791921 |
- Install water temperature regulator housing (2) .
Show/hide table
 | |
| Illustration 3 | g00791916 |
- Install water line (1) to the water temperature regulator housing.
Show/hide table
 | |
| Illustration 4 | g00791914 |
- Fill the coolant system to a correct level.
Caterpillar Information System:
G3408C and G3412C Engines Water Temperature Regulator - Remove
2001/04/16 Correction to Operation and Maintenance Manual, SEBU7275-01, "Maintenance Interval Schedule" {7500}
3412C Engine Connecting Rod
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
G3408C and G3412C Engines Turbocharger - Assemble
Product Identification Numbers (PIN) Location Guide Excavator (Track)
SPS342 Skid Mounted Pumper Model View Illustrations
G3408C and G3412C Engines Turbocharger - Disassemble
G3500 Generator Sets Refill Capacities
3412C Engine Pistons and Connecting Rods - Assemble
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
3500B Engines Turbocharger
3412C Engine Connecting Rod Bearings - Install
G3408C and G3412C Engines Engine Oil Pan - Remove
G3408C and G3412C Engines Engine Oil Pan - Install
G3408C and G3412C Engines Water Pump - Remove
SPS342 Skid Mounted Pumper Product Description
G3408C and G3412C Engines Water Pump - Install
3126B Engines for Caterpillar Built Machines Lifter Group - Remove and Install
G3408C and G3412C Engines Auxiliary Water Pump - Remove
3412C Engine Fuel Filter Base - Install
G3408C and G3412C Engines Auxiliary Water Pump - Install
3412C Engine Fuel Filter Base - Remove
G3408C and G3412C Engines Auxiliary Water Pump - Disassemble