Turbocharger
Type 1
Show/hide table
Illustration 1 | g00288169 |
(1) Tighten the clamp bolts to the following torque. ... 14 ± 1 N·m (10 ± 1 lb ft)
Lightly hit the clamps with a soft faced hammer. Again tighten the clamp bolts to the following torque. ... 14 ± 1 N·m (10 ± 1 lb ft)
(2) Apply 5P-3931 Anti-Seize Compound on the threads of the studs. Tighten the nuts to the following torque. ... 55 ± 5 N·m (41 ± 4 lb ft)
(3) Wastegate
Show/hide table
Wastegate Pressure     | |
Part Number     | Specification (1)     |
192-3110     | 105 ± 3 kPa (15 ± 0.5 psi)     |
193-0029     | 125 ± 3 kPa (18 ± 0.5 psi)     |
Show/hide table
( 1 ) | The pressure that is stated will produce 1 mm (0.0394 inch) of rod travel. |
Type 2
Show/hide table
Illustration 2 | g00731160 |
(1) Tighten the clamp nuts to the following torque. ... 14 ± 1 N·m (10 ± 1 lb ft)
Lightly hit the clamps with a soft faced hammer. Again tighten the clamp nuts to the following torque. ... 14 ± 1 N·m (10 ± 1 lb ft)
(2) Apply 5P-3931 Anti-Seize Compound on the threads of the studs. Tighten the nuts to the following torque. ... 55 ± 5 N·m (41 ± 4 lb ft)
Caterpillar Information System:
2001/01/01 A New Valve Cover Seal and a New Fastener are Used {7555}
Exhaust Temperature Scanner View Alarms
3126B Industrial Engine Electronic Control System Components
3126B Industrial Engine General Information
3500B Industrial Engines System Configuration Parameters
3406E and 3456 Industrial Engines Water Pump - Test
3054 and 3056 Marine Generator Set Engines Engine Vibration Troubleshooting
3500 Marine Engines Camshaft
Marine Monitoring System II Feature Configuration
C-15 and C-16 Industrial Engines Electronics Grounding Stud - Inspect/Clean/Tighten
Marine Monitoring System II Remote Operation
3054 Engine Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines Fuel System - Prime
3126B Industrial Engine Aftercooler - Test
SPP101 Skid Mounted Pumper Gauges and Indicators
2000/12/01 New Cylinder Head Gasket for C-10and C-12 Truck Engines {1124}
2001/02/01 Reman Cylinder Head Kits Are Now Available {1100}
3500B High Displacement Generator Set Engines Cooling System Operation
2001/02/01 Reman Cylinder Head Kits Are Now Available {1100}
G3516B and G3520B Generator Set Engines Vibration Damper - Remove and Install
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines Injection Actuation Pressure Control Valve Circuit - Test
3054E and 3056E Industrial Engines After Stopping Engine
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Starting Motor System
Marine Monitoring System II Customer Options