Type 1
Illustration 1 | g00390312 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)
Type 2
Illustration 2 | g00285285 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)
Type 3
Illustration 3 | g00390315 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)
Type 4
Illustration 4 | g00390316 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) The maximum temperature of the ring gear for installation ... 320°C (608°F)
Type 5
Illustration 5 | g00390317 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) The maximum temperature of the ring gear for installation ... 300°C (572°F)
Type 6
Illustration 6 | g00285281 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) The maximum temperature of the ring gear for installation ... 300°C (572°F)
Type 7
Illustration 7 | g00285288 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)
(3) The bore size in the bushing is the following size. ... 52.007 ± 0.013 mm (2.0475 ± 0.0005 inch)
(4) The diameter of the bushing is the following diameter. ... 72.022 ± 0.015 mm (2.8355 ± 0.0006 inch)
The bore size in the flywheel is the following size. ... 71.971 ± 0.015 mm (2.8335 ± 0.0006 inch)
Type 8
Illustration 8 | g00762932 |
Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.
(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)