Connector Contact Description
Show/hide table
Connector Pinout for the Thermocouple Rail and for Extension Cable 25     | ||||
Pin number     | 3616     | 3612     | 3608     | 3606     |
1     | 1 or 2+     | 1 or 2+     | 1+     | 1+     |
2     | 1 or 2-     | 1 or 2-     | 1-     | 1-     |
3     | 3 or 4+     | 3 or 4+     | 2+     | 2+     |
4     | 3 or 4-     | 3 or 4-     | 2-     | 2-     |
5     | 5 or 6+     | 5 or 6 +     | 3+     | 3+     |
6     | 5 or 6-     | 5 or 6-     | 3-     | 3-     |
7     | 7 or 8+     | 7 or 8+     | 4+     | 4+     |
8     | 7 or 8-     | 7 or 8-     | 4-     | 4-     |
9     | 9 or 10+     | 9 or 10+     | 5+     | 5+     |
10     | 9 or 10-     | 9 or 10-     | 5-     | 5-     |
11     | 11 or 12+     | 11 or 12+     | 6+     | 6+     |
12     | 11 or 12-     | 11 or 12-     | 6-     | 6-     |
13     | 13 or 14+     | Inlet to turbocharger +     | 7-     | Inlet to turbocharger +     |
14     | 13 or 14-     | Inlet to turbocharger -     | 7+     | Inlet to turbocharger -     |
15     | 15 or 16+     | Stack +     | 8-     | Stack +     |
16     | 15 or 16-     | Stack -     | 8+     | Stack -     |
17     | Inlet to turbocharger +     | Unused     | Inlet to turbocharger +     | Unused     |
18     | Inlet to turbocharger -     | Unused     | Inlet to turbocharger -     | Unused     |
19     | Stack +     | Unused     | Stack +     | Unused     |
20     | Stack -     | Unused     | Stack -     | Unused     |
21     | Stack +     | Unused     | Unused     | Unused     |
22     | Stack -     | Unused     | Unused     | Unused     |
23     | Unused     | Unused     | Unused     | Unused     |
24     | Unused     | Unused     | Unused     | Unused     |
25     | Shield     | Shield     | Shield     | Shield     |
Note: Vee engines use the same rail for both the even banks and the odd number banks. Pin 10 connects to the negative lead of the number 9 thermocouple when the pin is used on the right side of the engine. Pin 10 connects to the negative lead of the number 10 thermocouple when the pin is used on the left side of the engine.
Show/hide table
Pin number     | Thermocouple Connectors and Thermocouple Rail Connectors     |
1     | Negative     |
2     | Positive     |
3     | Shield     |
Caterpillar Information System:
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Walk-Around Inspection
3126B Engines for Caterpillar Built Machines Cylinder Head - Remove
C-15 and C-16 Industrial Engines Fuel System
3126 Truck Engine Military Pistons and Connecting Rods - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Relief Valve (Pilot)
2000/12/01 The Oil Seals Have Been Removed From The Exhaust Valves {1100}
C-15 and C-16 Industrial Engines Flywheel
Installation of the 3406B and 3406C Long Block Engines Installation of the 3406B and 3406C Long Block Engines
C-15 and C-16 Industrial Engines Air Inlet and Exhaust System
Marine Monitoring System II General Information
G3516B and G3520B Generator Set Engines Engine Oil Pump - Remove
C-15 and C-16 Industrial Engines Housing (Front)
2000/12/01 A New Gasket Is Used In An Exhaust Manifold {7555}
G3516B and G3520B Generator Set Engines Engine Oil Pump - Install
C-15 and C-16 Industrial Engines Lubrication System
C-10, C-12, C-15 and C-16 Industrial Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C-15 and C-16 Industrial Engines Cooling System
C-15 and C-16 Industrial Engines Flywheel Housing
Electronic Modular Control Panel II (EMCP II) Service Mode
3512B SR4B Generator Sets Voltage Regulators
3500 and 3500B Engines Plate Locations and Film Locations
C15 Petroleum Generator Set Engines Basic Engine
3306B Generator Set Voltage Regulator Options
2000/12/01 Repair Parts Available for Alternator R-Terminal {1405}