Relief Valve (Pilot)
Show/hide table
图 1 | g01434032 |
(1) 先导安全阀总成的扭矩 ... 117.6 ± 9.8 N·m (85 ± 7 lb ft)
(2) 螺母扭矩 ... 49.0 ± 4.9 N·m (36 ± 4 lb ft)
Caterpillar Information System:
2000/12/01 The Oil Seals Have Been Removed From The Exhaust Valves {1100}
C-15 and C-16 Industrial Engines Flywheel
Installation of the 3406B and 3406C Long Block Engines Installation of the 3406B and 3406C Long Block Engines
C-15 and C-16 Industrial Engines Air Inlet and Exhaust System
Marine Monitoring System II General Information
G3516B and G3520B Generator Set Engines Engine Oil Pump - Remove
C-15 and C-16 Industrial Engines Housing (Front)
2000/12/01 A New Coolant Level Sensor is Available {7422}
C-10, C-12, C-15 and C-16 Industrial Engines CAN Data Link Circuit - Test
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Analog Sensor - Calibrate
3516B Power Package Safety Messages
365B, 365B Series II and 365BL Excavators Window Washer Reservoir - Fill
3126 Truck Engine Military Pistons and Connecting Rods - Install
C-15 and C-16 Industrial Engines Fuel System
3126B Engines for Caterpillar Built Machines Cylinder Head - Remove
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Walk-Around Inspection
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System Connector Contact Description
2000/12/01 A New Gasket Is Used In An Exhaust Manifold {7555}
G3516B and G3520B Generator Set Engines Engine Oil Pump - Install
C-15 and C-16 Industrial Engines Lubrication System
C-10, C-12, C-15 and C-16 Industrial Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C-15 and C-16 Industrial Engines Cooling System
C-15 and C-16 Industrial Engines Flywheel Housing
Electronic Modular Control Panel II (EMCP II) Service Mode