A New Boost Pressure Sensor is Available {1917}
- Marine Engines:
- 3176B (S/N: 9WK837-UP)
- 3176C (S/N: 6BW1-UP)
- 3196 (S/N: 2XR1-UP)
- 3406E (S/N: 9WR1-UP)
Description of Change: A new boost pressure sensor is available for the engines that are listed above. The sensor body is constructed of brass which better resists corrosion and deterioration from moisture.
Adaptable To: The new 169-3725 Pressure Sensor is a direct replacement for the former design.
Caterpillar Information System:
3054 Engine Alternator - Test
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pressure Switch
2001/10/01 A New Configuration of Valve Springs Is Now In Production {1108}
3054 Engine Flywheel - Inspect
3054 Engine Flywheel Housing - Inspect
Marine Monitoring System II Related Components
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Prelubrication System
3126E and 3126B Commercial and Truck Engines Engine Storage Procedure - Check
3054 Engine Connecting Rod - Inspect
G3516B and G3520B Generator Set Engines Engine Oil Cooler - Install
Marine Monitoring System II Analog Input Module
3054 and 3056 Marine Generator Set Engines Cylinder Liner - Install
365B, 365B Series II and 365BL Excavators Window Washer Reservoir - Fill
3516B Power Package Safety Messages
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Analog Sensor - Calibrate
C-10, C-12, C-15 and C-16 Industrial Engines CAN Data Link Circuit - Test
2000/12/01 A New Coolant Level Sensor is Available {7422}
C-15 and C-16 Industrial Engines Housing (Front)
G3516B and G3520B Generator Set Engines Engine Oil Pump - Remove
Marine Monitoring System II General Information
C-15 and C-16 Industrial Engines Air Inlet and Exhaust System
Installation of the 3406B and 3406C Long Block Engines Installation of the 3406B and 3406C Long Block Engines
C-15 and C-16 Industrial Engines Flywheel
2000/12/01 The Oil Seals Have Been Removed From The Exhaust Valves {1100}