Configuration Parameters
配置参数是那些影响发动机功率或发动机的各种不同特点的参数。 起动发动机之前，盘车持续时间和盘车循环的最高次数必须在工厂设定值以外重新进行编程设定。
可使用卡特彼勒电子技师(ET)对这些配置参数进行编程设定。 更多有关信息资料，请参阅故障诊断与排除，以便编程设定这些配置参数。
有些参数可能并不适用于所有应用。 如果某一参数无效，卡特彼勒电子技师(ET)将会在此参数被选择时指示"无效(unavailable)"。 电子控制模块(ECM)必须进行编程设定。 如果发动机配备了这些附件，应确保"空气关断(Air Shutoff)"、"乙醚控制(Ether Control)"和"电子监测系统状态(Plt Hse EMS Status)"参数被编程设定为"启用/接通(ENABLED/ON)"。 如果发动机某一配备这些附件，确保将这些参数编程设定为"关停/断开(DISABLED/OFF)"。 如果发动机配备了预润滑装置，"发动机预润滑持续时间(Eng. Prelube Duration)"必须被编程设定为一个非0秒钟的数值。 如果此数值没有被编程设定，预润滑马达将不会运转。 如果发动机没有配备预润滑装置的话，那么此参数就应编程设定为"0"。 后冷器系统的正确配置必须编程设定。
Caterpillar Information System:
3306C Truck Engine Increased Engine Oil Temperature - Inspect
C7 Engines for Caterpillar Built Machines Excessive Bearing Wear - Inspect
3306C Truck Engine Excessive Engine Oil Consumption - Inspect
3500B Engines for Caterpillar Built Power Modules Shutdown Notification Output
3306C Truck Engine Water Temperature Regulator - Test
EMCPII+ for Gas Engines GSC CID 0110 - FMI 04
G3516B Engines PWM Sensor
3306C Truck Engine Cooling System - Test
3306C Truck Engine Cooling System - Inspect
3306C Truck Engine Cooling System - Check
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application PTO Parameters - Program
3306C Truck Engine Electric Starting System - Test
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application PTO Configurations - Test
EMCPII+ for Gas Engines GSC CID 0175 - FMI 02
Alternator - Delco 21SI Insulated Screw - Check
2000/07/01 Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0447 - FMI 12 (for EUI Engines)
JF Series Starting Motor Starting Motor - Assemble
G3516B Engines Oxygen Sensor - Calibrate
Alternator - Delco 21SI Rectifier - Test
2000/10/23 Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
EMCPII+ for Gas Engines GSC CID 0334 - FMI 03
2000/07/01 Identify OEM Selling Dealer On-line {1000}
EMCPII+ for Gas Engines GSC CID 0175 - FMI 03