Actuator Control Linkage - Lubricate
Show/hide table
| |
| Illustration 1 | g00709892 |
|
Grease fittings | |
Apply grease to the grease fittings. Use a hand grease gun and lubricate the grease fittings with MPGM.
Check the linkage for proper operation. Adjust the linkage, if necessary. Refer to the engine's Specifications.
Caterpillar Information System:
G3406 and G3412 Generator Sets Control Panel
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0254 FMI 12 Electronic Control Module Error
3034 Engine for Caterpillar Built Machines Turbocharger - Inspect
G3408C and G3412C Engines Gas Pressure Regulator - Check
3126B and 3126E On-highway Engines Engine Cranks but Will Not Start
120H and 135H Motor Graders Tire Information
G3516B Engines E270 Driven Equipment Shutdown Requested
3126B and 3126E On-highway Engines Electronic Service Tool Will Not Communicate with ECM
G3516B Engines E269 Customer Shutdown Requested
G3516B Engines E268 Unexpected Engine Shutdown
G3516B Engines E266 Low Hydrax Oil Pressure
G3516B Engines E250 Low Left Turbo Turbine Inlet Temperature
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Auxiliary Brake Circuit - Test
120H and 135H Motor Graders Parking
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>4P-2236</B> Generator through <B>4P-9907</B> Generator
G3516B Engines E401 Cylinder #1 Detonation
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Engine Running Output Circuit - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 04 Engine Oil Pressure short to ground
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Engine Shutdown Output Circuit - Test
G3516B Engines E801 Cylinder #1 High Exhaust Port Temp
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt