G3516B Engines Caterpillar


E270 Driven Equipment Shutdown Requested

Usage:

G3516B 7EZ
Conditions Which Generate This Code:

The crank terminate relay is set and the engine is running. The input requests a shutdown for 200 ms.

System Response:

The fuel is shut off. The shutdown output is activated. The code is logged.

Possible Performance Effect:

The engine is shut down.

Troubleshooting:

Test Step 1.

Refer to Troubleshooting, "Driven Equipment".

Results:

  • OK - STOP

Caterpillar Information System:

3126B and 3126E On-highway Engines Electronic Service Tool Will Not Communicate with ECM
G3516B Engines E269 Customer Shutdown Requested
G3516B Engines E268 Unexpected Engine Shutdown
G3516B Engines E266 Low Hydrax Oil Pressure
G3516B Engines E250 Low Left Turbo Turbine Inlet Temperature
G3516B Engines E249 Low Right Turbo Turbine Inlet Temperature
G3516B Engines E264 Emergency Stop Activated
G3516B Engines E248 Low Right Turbo Turbine Outlet Temperature
G3516B Engines E247 Low Left Turbo Turbine Outlet Temperature
G3516B Engines E246 High Left Turbo Turbine Inlet Temperature
G3516B Engines E245 High Right Turbo Turbine Inlet Temperature
G3516B Engines E244 High Right Turbo Turbine Outlet Temperature
120H and 135H Motor Graders Tire Information
3126B and 3126E On-highway Engines Engine Cranks but Will Not Start
G3408C and G3412C Engines Gas Pressure Regulator - Check
3034 Engine for Caterpillar Built Machines Turbocharger - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0254 FMI 12 Electronic Control Module Error
G3406 and G3412 Generator Sets Control Panel
G3408C and G3412C Engines Actuator Control Linkage - Lubricate
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Auxiliary Brake Circuit - Test
120H and 135H Motor Graders Parking
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>4P-2236</B> Generator through <B>4P-9907</B> Generator
G3516B Engines E401 Cylinder #1 Detonation
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.