G3406 Engine Caterpillar

Model View Illustrations

Usage:

G3406 1RK

The illustrations show various typical features of the G3406 Engine. The illustrations do not show all of the options that are available. Because of individual applications, your engine may appear different from the illustrations.

Show/hide table




Illustration 1	g01072409
Turbocharged Aftercooled Industrial Engine (1) Lifting eye (2) Crankcase breather (3) Oil level gauge (4) Oil filler (5) Crankshaft vibration damper (6) Exhaust bypass valve (7) Governor control lever (8) Throttle (9) Aftercooler (10) Oil filter (11) Air cleaner (12) Turbocharger (13) Exhaust (14) Oil Drain (15) Carburetor

Show/hide table




Illustration 2	g01269190
Naturally aspirated G3406 Generator Set (1) Control panel (2) Circuit breaker (3) Battery charger (4) Oil filler (5) Crankcase breather (6) Oil level gauge (7) Oil filter (8) Radiator filler cap (9) Lifting eye (10) Air cleaner (11) Battery (12) Starting motor (13) Exhaust (14) Water drain (15) Oil Drain (16) Gas pressure regulator (17) Customer connection (18) Gas Shutoff Valve (GSOV) (19) Generator

Caterpillar Information System:

3176C and 3196 Engines for Caterpillar Built Machines Camshaft

3114, 3116, and 3126 Engines Fuel System Pressure - Test

G3408 and G3412 Engines Gauges and Indicators

3034 Engine for Caterpillar Built Machines Piston Cooling Jets - Remove and Install

3618 Engine Annunciator Panel - Inspect

3114, 3116, and 3126 Engines Fuel System - Prime

3034 Engine for Caterpillar Built Machines Camshaft - Install

G3516B Engines +5V Sensor Voltage Supply

3126B Marine Engine Aftercooler Condensate Drain Valve - Inspect/Clean

2000/04/01 Revised Troubleshooting Module Available {1000}

3034 Engine for Caterpillar Built Machines Camshaft - Remove

2000/12/01 A New Electronic Actuator Is Used In Gas Pressure Regulator Groups That Are On Engines That Have Air/Fuel Ratio Control Systems {1716}

3034 Engine for Caterpillar Built Machines Fan - Remove and Install

3114, 3116, and 3126 Engines Fuel Timing Dimension - Adjust

3034 Engine for Caterpillar Built Machines Crankshaft Gear - Remove and Install

584 and 584HD Forwarders General Hazard Information

325, 325B and 325L Excavators Part Number Location

325, 325B and 325L Excavators Final Drive Ring Gear Removal

120H and 135H Motor Graders Fire Prevention and Explosion Prevention

SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>121-6882</B> Generator through <B>123-3185</B> Generator

2000/09/11 170-9227 Shims Will Control Injector Sleeve Reaming {0700, 0703, 0706, 1000}

325, 325B and 325L Excavators S·O·S Oil Analysis

325, 325B and 325L Excavators Refill Capacities

3114, 3116, and 3126 Engines Unit Injector - Adjust