A New Electronic Actuator Is Used In Gas Pressure Regulator Groups That Are On Engines That Have Air/Fuel Ratio Control Systems {1716}
- Engines:
- G3508 (S/N: 9TG)
- G3512 (S/N: 7NJ)
- G3516 (S/N: 4EK)
Description of Change: New electronic actuators are used in the gas pressure regulator groups on the above engines that have air/fuel ratio control systems. The new electronic actuators include a five pin electrical connector. The former electronic actuators include a six pin electrical connector.
Adaptable To: The new 187-3516 Electronic Actuator has replaced the 141-8799 Electronic Actuator in the gas pressure regulator groups on these engines. The table identifies the effectivity of the new electronic actuators and the gas pressure regulator groups on these engines. The 141-8799 Electronic Actuator is still available to service engines that include electronic actuators with a six pin connector.
Show/hide table
Effectivity And Usage Of The New 187-3516 Electronic Actuator     | ||
Engine Model     | Effective Serial No.     |
Gas Pressure Regulator Gp Part Number     |
G3508     | 9TG226     | 175-6827     |
G3512     | 7NJ634     | 155-1723     |
G3516     | 4EK2831     | 155-1724     |
Caterpillar Information System:
G3406 Engine Safety Messages
G3408 and G3412 Engines Model View Illustrations
G3516B Engines Engine Starts but Stalls Immediately
G3516B Engines Event Codes
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>115-5101</B> Generator through <B>121-6860</B> Generator
3114, 3116, and 3126 Engines Fuel Ratio Control - Adjust
3126B Marine Engine Diagnostic Lamp
2000/04/01 New Service Manuals and Revised Service Manuals are Available {1000}
3126B Marine Engine Starting the Engine
3512B and 3512C Engines For Caterpillar Built Machines Camshaft
3512B Marine Auxiliary Engine Crankshaft
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install - Serrated Connecting Rod
3034 Engine for Caterpillar Built Machines Camshaft - Remove
2000/04/01 Revised Troubleshooting Module Available {1000}
3126B Marine Engine Aftercooler Condensate Drain Valve - Inspect/Clean
G3516B Engines +5V Sensor Voltage Supply
3034 Engine for Caterpillar Built Machines Camshaft - Install
3114, 3116, and 3126 Engines Fuel System - Prime
3618 Engine Annunciator Panel - Inspect
3034 Engine for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
G3408 and G3412 Engines Gauges and Indicators
3114, 3116, and 3126 Engines Fuel System Pressure - Test
3176C and 3196 Engines for Caterpillar Built Machines Camshaft
G3406 Engine Model View Illustrations