Pilot Valve (Boom Swing) - Disassemble
Start By:
- Remove the pilot valve. Refer to Disassembly and Assembly, "Pilot Valve (Boom Swing) - Remove".
- Remove bolts (1), solenoids (2), plug (4), and the O-ring seal from block (3).
Show/hide table
Illustration 2 g01227496 - Remove O-ring seals (5), nut (9), nut (8), and coil (7) from cartridge (6).
Show/hide table
| |
| Illustration 1 | g01227495 |
Caterpillar Information System:
2006/01/30 Improved Air Conditioning Circulation on Excavator {7251, 7276}
2006/04/24 A Conical Bumper Has Been Added for the Alignment of the Rear Hood on Mini Hydraulic Excavators {1051, 7251}
Squeal which is Caused by the Pressure Relief Valve on 301.6C, 301.8C and 302.5C Mini Hydraulic Excavators{5057, 5264} Squeal which is Caused by the Pressure Relief Valve on 301.6C, 301.8C and 302.5C Mini Hydraulic Excavators{5057, 5264}
2006/02/13 Disposable Dessicant Filter is Now Available {0618, 0646}
2006/01/23 Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
C11 and C13 Engines Engine Oil Pressure Sensor
2006/01/30 Installation Instructions for the Grease Fittings on Hydraulic Hammers {6333}
320D and 323D Excavators Machine System Specifications Stick Cylinder
320D and 323D Excavators Machine System Specifications Boom Cylinder
Fast Fill System-Fuel {1273, 1279, 1710} Fast Fill System-Fuel {1273, 1279, 1710}
C27 and C32 Engines for Caterpillar Built Machines CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
325D and 329D Excavators and 325D Material Handler Machine System Specifications Recoil Spring
303.5C and 303C Mini Hydraulic Excavators Machine Systems Pilot Valve (Boom Swing) - Assemble
Installation of the 225-4256 Film {7405, 7557} Installation of the 225-4256 Film {7405, 7557}
C15 Engine for the 657G Wheel Tractor-Scraper Event Codes
2006/03/27 Relocation of the Quick Disconnect Connector's on the Excavator Stick {1329, 5057}
2006/01/30 Installation Procedure for Accumulators on Mini Hydraulic Excavators {5077}
330D and 336D Excavators Machine System Specifications Main Hydraulic Pump
325D and 329D Excavators Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
M325D and M330D Excavators Power Train Electronic Control System Connector Contact Description
2006/06/05 The Stick and Bucket Cylinders are Improved on Mini Hydraulic Excavators {5457, 5458}
2006/03/20 A New Exhaust Gasket Is Now Available {1059}
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Compressor
Salvage of Tapered Steering Bores {4301, 4305, 4310} Salvage of Tapered Steering Bores {4301, 4305, 4310}